About mini water heater installation and use Installation environment requirements: kitchen, bathroom, toilet, shower room, wire requirements are greater than 2.5 square meters; circuit breaker switch is greater than 32 -by -32; Common faults and treatment methods: 1. Check whether the power supply is normal and power. The power display indicator will light up the temperature, and it will not light up without power. 2. Under normal power -powered conditions, the water flow is turned on, and the key is pressed. , Click the temperature control switch to recover. The other is the heating pipe failure, and the heat pipe can be replaced 4. If the display is not heated, the display of the display screen is circulating, indicating that the water flow has not passed through the water heater, or the water pressure is too low, or the installation direction is wrong. Pay attention to the correct installation of water and water out of the water. However Heating, then check the water inlet turbine, which may be stuck in the turbine with dirt, causing the water heater to not start. 5. It is recommended that the water outlet water pipe length is not exceeded by 3 meters. If the water pipe may be caused by the water pressure difference, the water pressure may not be started. (If the water tower is used in rural areas, The pressure reaches the start value) 6. Display display E1 ultra -temperature, E3/E4 or temperature sensor failure, first power off, use cold water over the machine, and then use it to use it. Pay attention to the usual use of water. Do not be too small 7. The heating pipe failure display E2, you need to replace the heating pipe
Specifications:
Rated power
3000W-3500W
Insert
10A
The heat time
continuous warmth
Interface
International 4 -point caliber
Work water pressure
0.04 Pa low pressure startup
Voltage/frequency
220V/50Hz
Waterproof level
IPX4
Water entry method
downwater
Wire
1.5 square meters
Product size
19.5*11.6*7cm
Weight
1.1kg
Anti -shock protection category
Class 1
Features: 1. Small volume heating block installation is simple and convenient, suitable for installation in kitchen, toilet, shower, public toilet, etc. 2. Suitable for usual washing, washing your hands, wash dishes, washing your face, bathing, bathing 3. The temperature range is between 20-50 degrees, the temperature is controlled through the water flow, the large temperature is low, and the water flow is small and the temperature is high 4. You can set the bride and degrees Celsius mode switch. When the boot is turned on, long press the boot button for more than 6 seconds, you can switch mode
Roymall C.o.
ຂອງຂວັນຟຣີ
ນະໂຍບາຍການຈັດສົ່ງ
ນະໂຍບາຍການຄືນ
Coupon Code
Direct purchase from the factory 
Home Appliances
Home Appliance Parts
Water Heater Parts
