A gba awọn nkan pada laarin awọn ọjọ 40. Awọn nkan aṣa ko le pada. Awọn nkan ti a ra pẹlu kaadi ẹbun ni iyipada nikan.
Ẹbun Ọfẹ
Kaabọ si Roymall, oju opo wẹ ẹbun rẹ. A dupẹ lọwọ rẹ, a si pese ẹbun ọfẹ pẹlu eyikeyi rira.Ṣetan lati ṣawari akojo wa? Yẹra ni koko wa, fi aṣẹ rẹ sii, ki o si gba ẹbun ọfẹ rẹ.
Ilana Gbigbe
A nṣe awọn aṣẹ laarin ọjọ 2.Gbigbe deede jẹ ọjọ 5-7.Akoko gbigbe le yatọ da lori ibudo.
1. Ilana Pada
A gba nikan awọn nkan ti a ra lati roymall.com.Awọn ẹbun ọfẹ ko le pada.Nkan gbọdọ jẹ ailohunsi ati ni apoti atilẹba.A nṣe awọn pada laarin ọjọ 3-5 lẹhin gbigba.Awọn nkan aṣa ko le pada.Kan si wa: service@roymall.com tabi Whatsapp: +447549870296
2.Ilana Isanwo
Iwọ yoo gba isanwo lẹhin gbigba nkan.A ko san owo gbigbe pada.Kan si wa: service@roymall.com tabi Whatsapp: +447549870296
Videos for similar product
Loading product videos...
❮
❯
Products related to this item
Loading related products...
❮
❯
Specification:
Gears : Metal
Ball bearings : 2pcs
Weight : 28,7g
Dimensions : 35.9 x 32 x 10 mm
Speed/Torque@ 4,8V : 5,8kg/cm - 0,20sec/60°
Speed/Torque@ 6.0V : 7,6kg/cm - 0,16 sec/60°
Speed/Torque@ 7.4V : 8,8kg/cm - 0,13 sec/60°
Input Voltage : 4.8V - 8.4V
Harness length : 220mm
Compatibility : U" niversal connector
Dead band : 2μs (adjustable)
Features:
High end technology servo specially designed to be mounted in g"llider wings or every other demanding application.
Its small thickness allow it to be mounted in g"llider wings.
Full alu case, metal gears mounted on 2 BB combining reliability, p" recision and strength.
Package included:
1 x VOTIK 8525MG-D Metal Gear Steering Gear Digital Servo for RC Airplane Spare Part Fixed Wing
Nicely machined aluminium housing. Gear train has only small slack, runs not as quietly as higher priced servos, but still smooth.
Unfortunately the servo lever has too much slack on the output gear shaft, this makes the good mechanics worse than it could be. This shouldn't be tragic, because some thin alu foil pressed in there should reduce the slack.
Good value, I will order another one for further tests and try the servos for ailerons in a 2.5m GFK hang glider.