Features:

1. Simple operation: VDIAGTOOL 210 automotive repair cable can locate short circuits, breaks and leakage of automotive cables based on tone changes, and can even trace wires/cables without damaging the insulation layer
2. Wide compatibility: 6-42V VDIAGTOOL V210 automotive circuit tester can not only measure 6-42V voltage, but also support measuring line problems of cars, trucks, motorcycles and even ships
3. Short Open Finder Checker: VDIAGTOOL V210 Short Open Finder Checker can instantly detect open circuits and locate short circuits based on tone changes, simplifying diagnosis
4. Wire Tracing: Easy to use, just connect the transmitter of the VDIAGTOL V210 circuit tester in series to the circuit or line under test, and then use the tracer"s flexible probe to scan the circuit/line to find the fault point.
5. Efficient Wire Diagnosis: Quickly diagnoses open circuit points, broken connections, and more.

Description:

VDIAGTOOL V210 Automotive Open Short circuit tester is powered by two 9V batteries and can easily locate open circuit points, broken connections, broken wires, leakage according to the tone changes, and can even trace wires/cables without damaging the insulation layer:
Locating Short Circuit Safely
Checking Open Circuit Quickly
Tracing Wire Accurately
For DIY enthusiasts, electricians and technicians, this is a convenient and efficient car circuit diagnostic tool that can easily and quickly determine the continuity of cables/wires and diagnose open circuit.

VDIAGTOOL V210 Automotive Open/Short Finder Wide Compatibility:

1. Circuit diagnosis:

u2714 Works with 6-42V DC systems

2. Supported models:

u2714automobiles;
u2714trucks;
u2714tractors;
u2714boats;
u2714RVs;
................

3. Support diagnosis of circuit fault types:

u2714locate open circuit points;
u2714broken connections;
u2714broken wires;
u2714leakage;
..................
Why Choose VDIAGTOOL V210 Automotive Circuit Finder:

1.Locate Open Circuits:

Open Wire Detector instantly detects and alerts you to open circuits. Easily locate short circuits, broken wires, open connections, current leaks, and trace wires. Transmitter and receiver LEDs indicate open or short circuit conditions.
This Automotive Short and Open Finder, car repair tool is designed to identify and trace wires or cables without damaging the insulation. You can also use it in checking for short circuit and locating open circuit and so on.

2.Check Short Circuits:

Automotive Short Circuit Finder allows you to identify intermittent circuit problems by flexing wires or connectors and listening for changes in the receiver tone. This automotive circuit finder with 6.7-inch flexible probe, It can helps reach wires in congested places.

3.Wire Tracing:

Easy to use by just simply connect the transmitter in series with the circuit or wire under test, (i.e.: in place of a blown fuse, across a connector, in series with an open wire, a light bulb socket, etc.), and scanning the circuit/wire with the tracers flexible probe to find the trouble spot.

VDIAGTOOL V210 Car Circuit Tester User Guide:

1. Select mode:

u2714TONE mode - Use for open circuit detection or wire tracing;
u2714CONT mode - Use for continuity checks or short circuit testing.

2.Connect sensors:

Attach the probes or clamps to the wire/cable being tested.

3.Diagnose:

The tool will indicate breaks (open) or unintended connections (short).

4. Precautions for use:

1)Signal strength affects volume: If the sound is low, try adjusting the probe position to find a stronger signal for accurate detection;
2)The sound signal may be affected by propagation,resistance, shielding, and circuit complexity. To improve accuracy, check wiring step-by-step and complete signals to pinpoint the exact short;
3) When the signal is not strong enough, the volume will be low in the receiver, please find a strong signal and try to turn the signal up to the highest level; checking whether the battery power is sufficient at the same time, since it will effect the tool working properly. When the tool is not used, please leave it in the OFF position or remove the batteries directly to avoid draining the power;
4)V210 is an entry-level tester and can only roughly determine the short circuit area through sound signals but the exact short point in multiple and complex wires. Any issue before or after purchase, please check with us!

VDIAGTOOL V210 Auto Circuit Tracer:

1. Battery Compartment - Houses power source for operation.(battery not include)
2. Test Lead - Connects to wires/circuits for diagnostics.
3. Mode Switch - Toggles between TONE (wire tracing/open circuit) and CONT (continuity/short circuit) modes.
4. Transmitter Switch - Activates signal transmission for circuit analysis.
5. Test Button - Initiates diagnostic checks.
6. Built-in Buzzer (Speaker) - Provides audible alerts for faults (e.g., beeps for shorts/breaks).

Specification:
Brand: VDIAGTOOL
Model: V210
Name: Automotive Circuit Tester
Color: Black
Voltage Detection Range: 6V-42V DC
Receiver Dimensions: 1.8 * 14 inch
Probe Length: 6.7 inch extension
Sender Dimensions: 2.36 * 2.95 inch
Application Formats: Cars, RVs, Trucks, Boats, Tractors

Note:
The reveiver needs two 9V batteries to be operated, the Batteries are not included.

Package included:
1 X V210 Transmitter
1 X V210 Reveiver
1 X User Manual