Roymall ته ښه راغلاست، د عالي کیفیت ډیپارټمنټ سټور ډالۍ اخیستلو لپاره ستاسو مسلکي ویب پاڼه. موږ ستاسو ملاتړ لوړه ارزښت او تقدیر کوو او زموږ د مننې څرګندولو لپاره ستاسو پیرودونو ته اضافي هیجان اضافه کوو. کله چې تاسو زموږ سره پیرود کوئ، تاسو نه یوازې د لوړ کیفیت محصولاتو څخه خوند اخلئ چې ستاسو ژوند ته ښه والی راوړي، بلکې تاسو به د هرې امر سره یو ځانګړی وړیا ډالۍ هم ترلاسه کوئ.آیا چمتو یاست چې زموږ مجموعه وپلټئ او خپله عالي ډالۍ ومومئ؟ زموږ د عالي کیفیت ډیپارټمنټ سټور توکو انتخاب وګورئ، خپله امر وکړئ او ستاسو د پیرود سره د ستاسو وړیا ډالۍ راتلو هیجان ته تمه ولرئ.
د لېږد تګلاره
موږ به ستاسو امرونه ترلاسه کولو وروسته ستاسو لپاره توکي ورسوو او ډاډ ترلاسه کوو چې په خوندي توګه ورسي. د تحویلي توضیحات به ستاسو د تایید بریښنالیک کې وړاندې شي.په ډیری مواردو کې، امرونه په 2 ورځو کې پروسس کیږي.په ځانګړو حالاتو کې، دا په لاندې ډول بهیروی: کله چې تاسو په شنبه، یکشنبه یا عامه رخصتي کې امر وکړئ، دا به 2 ورځې وځنډوي..معمولا, 5-7 کار ورځې (د دو شنبې څخه تر جمعې) ته اړتیا لري پرته له دې چې د الوتکې وځنډ یا نور چاپېریالي عواملو څخه اغیزمن شي..ځکه چې زموږ د لېږد خدمت نړیوال دی، نو د تحویلي وختونه به ستاسو د موقعیت پورې اړه ولري نو ممکن یو څه وخت ته اړتیا ولري او که تاسو په لرې سیمو یا هیوادونو کې یاست صبر وکړئ.
1. د راګرځېدو او بدلون تګلاره
موږ یوازې د roymall.com څخه اخیستل شوي توکي منو. که تاسو زموږ له محلي ویشونکو یا نورو خرڅونکو څخه پیرود کوئ، تاسو نشئ کولی دا زموږ په خوا کې راګرځوئ.د وروستي پلور توکي یا وړیا ډالۍ د راګرځېدو لپاره مناسبه نه دي.د راګرځېدو لپاره وړتیا لپاره، ستاسو توکي باید نا کارول شوي وي او په ورته حالت کې وي چې تاسو یې ترلاسه کړي. دا باید په اصلي بسته بندۍ کې هم وي.له موږ څخه د راګرځېدو لارښوونې ترلاسه کولو وروسته، مهرباني وکړئ خپل راګرځېدلي توکي بسته کړئ او خپله بسته په محلي پوسټ آفیس یا بل کوریر کې پرېږدئ. موږ به ستاسو راګرځېدلي یا بدل شوي توکي په 3-5 کار ورځو کې پروسس کړو وروسته له هغه چې موږ یې ترلاسه کړو. راګرځېدنه به پروسس شي او په اتومات ډول ستاسو د اصلي تادیې میتود ته بیرته ورکړل شي.هیڅ راګرځېدنه یا بدلون نشي منل کیدی که چیرې محصول دودیز تولید شوی وي، په کې دودیز اندازه، دودیز رنګ، یا دودیز چاپ شامل وي.نورې مرستې ته اړتیا لرئ؟ مهرباني وکړئ زموږ سره اړیکه ونیسئ. service@roymall.com یا Whatsapp: +447549870296
2.د راګرځېدو تګلاره
تاسو به یو بشپړ راګرځېدنه یا 100% پلورنځي کریډیت ترلاسه کړئ وروسته له هغه چې موږ راګرځېدلي بسته ترلاسه او چک کړو. راګرځېدنه به پروسس شي او په اتومات ډول ستاسو د اصلي تادیې میتود ته بیرته ورکړل شي.مهرباني وکړئ په یاد ولرئ چې د لېږد لګښتونه او کوم حقوق یا فیسونه راګرځېدونکي ندي. اضافي د لېږد لګښتونه راګرځېدونکي ندي کله چې بسته ولېږل شي. تاسو مسؤل یاست چې دا فیسونه تادیه کړئ او موږ نشو کولی دوی معاف یا بیرته ورکړو، حتی که امر زموږ ته راګرځېدلی وي.کله چې موږ ترلاسه او تایید کړو چې ستاسو راګرځېدلي توکي، موږ به تاسو ته یو بریښنالیک واستوو چې تاسو ته خبر ورکړو چې موږ ستاسو راګرځېدلي توکي ترلاسه کړي دي. موږ به تاسو ته د ستاسو د راګرځېدنې د تصویب یا رد په اړه هم خبر ورکړو.که ستاسو د راګرځېدو پروسې سره کومه ستونزه وي، مهرباني وکړئ زموږ سره اړیکه ونیسئ. service@roymall.com یا Whatsapp: +447549870296
Videos for similar product
Loading product videos...
❮
❯
Products related to this item
Loading related products...
❮
❯
Description:
The instrument is a small electronic enthusiasts, developers, electronic maintenance and production plant research and development of small instruments. Can be measured in-line devices, but also test chip devices, can be measured a variety of diodes, transistors, MOS tube; can determine the device type, the polarity of the pin, the output HFE, valve voltage, the junction capacitance of the FET, measurable capacitance and resistance.
Features:
1. Two key operation, automatic shutdown.
2. A key operation, boot test, a key to get.
3. Automatically test the pin element and display them on the LCD.
4.1602 LCD screen with LCD (12864 LCD backlight).
5. Test speed, active ingredient test: 2 seconds (in addition to the larger capacitor capacitance measurement also takes a long time, the measurement time is one minute is normal).
6. Only 20na off current.
7. Automatic detection of NPN, PNP bipolar transistors, N-channel and P-channel MOS field-effect transistors, junction type FET, diodes, diodes, thyristors, low power unidirectional and bidirectional thyristors.
8. Automatic identification element pin arrangement.
9. Bipolar transistor current amplification factor and base-emitter threshold voltage measurement.
10. Identify the Darlington transistor by the base emitter threshold voltage and the high current amplification factor.
11. Detectable bipolar transistors and MOS transistor protection diodes.
12. Gate MOS FET threshold voltage and gate capacitance measurement.
13. Two resistors and resistor symbols can be measured simultaneously. The right shows a decimal value of 4. Both sides of the resistor symbol show the number of pins. So you can measure the potentiometer. If the potentiometer wiper does not move to extreme positions, we can distinguish between the middle and the ends of the needle.
14. Resistive measurement resolution of 0.1Ω, can measure 50MΩ.
15. Can measure 325pf-100mf capacitor, resolution 1pf.
16. 2uf More capacitors can measure the equivalent series resistance at the same time. Two can be displayed in decimal values with a resolution of 0.01Ω.
17. Two diodes can be displayed in the correct order and the diode symbol, and the diode forward voltage is given.
18. The LED is detected as a diode with a higher forward voltage. The combination of LEDs is identified as two diodes.
19. Reverse breakdown voltage less than 4.5v zener diode can be identified.
20. Can measure a single diode reverse capacitance. If the bipolar transistor is connected to the collector and emitter of the base and pin, the collector or emitter junction reverse capacitance can be measured.
21. Can be connected with a single measurement rectifier bridge.
Specification:
Resistance: 0Ω-50MΩ Resolution: 0.01Ω
Capacitance: 25pf-100mf Resolution: 1pf
Inductance: 0.01mH-20H Resolution: 0.01mH
Measurement capacitance ESR Resolution: 0.01Ω
Battery: 9V battery (Not included)
Instructions:
1. Press the "boot / test" can be achieved boot and a test function, multiple tests can be repeated by this key; measured after 20 seconds, no operation automatically shut down.
2. The instrument provides patch, plug-in and external table three measurement methods, each way 1,2,3 feet are the same correspondence.
3. The device does not need to distinguish between the order of discipline, the measurement will be completed after the completion of each pin corresponding to the device function.
4. The instrument printed on the back of the electrolytic capacitor corresponding to the ESR typical reference table, the table is for reference only, please refer to the data published by the manufacturers.
5. Calibration
Short to 1, 2, 3 test points, press the "boot / test" button, the screen prompts whether to enter the calibration, in 2 seconds by "power on / test" button to confirm, enter the calibration.
After the screen prompts to disconnect 1, 2, 3 test points, continue after the break until the end of the prompt calibration.
Precautions:
Be sure to discharge the instrument before testing the capacitor, otherwise it may damage the instrument.
When using the adapter, use an adapter with a DC 9V-12V (including 9V, 12V) voltage range.
The instrument will not charge the battery, when the battery power is less than 6V, please replace the battery.
When the capacitor is discharged, it can be discharged without power on.
Packing Included:
1 x BSIDE ESR02PRO Digital Transistor Tester (Battery is not included)
Great ESR Inductance, Resistor, Cap and more Meter, a must have to test if the caps are ok, and MUCH more, it is VERY accurate, tested the ohms with a Elenco RS-500 and a calibrated Fluke 179 True-RMS Digital Multimeter, and the BSIDE ESR02PRO is also calibrated great, it graves almost all the same numbers as my Fluke 179.
I would recommend everyone this ESR Inductance, Resistor, Cap and more Meter, but be careful with the Plug-in device test seat, they can only be used with caps with normal small pins, use the external pen holder holes for the big caps and more.
I put a BSIDE ESR02PRO Typical ESR Value Of Electronic Capacitor unit paper with the photo's, so that you don't have to turn the BSIDE ESR02PRO around all the time to see what ohms the caps must be your testing.