Tbaħħir standard b'xejn fuq ordnijiet ta' aktar minn $9.9
Politika tar-ritorn
Oġġetti jistgħu jintirbu sa 40 jum mill-data tar-riċeviment. Oġġetti personalizzati ma jistgħux jintirbu. Oġġetti mixtrija b'gift card jistgħu biss jinbidlu; ma jistgħux jintirbu.
Rigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.
Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.
1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.
2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.
Videos for similar product
Loading product videos...
❮
❯
Products related to this item
Loading related products...
❮
❯
Specification:
Gears : Metal
Ball bearings : 2pcs
Weight : 28,7g
Dimensions : 35.9 x 32 x 10 mm
Speed/Torque@ 4,8V : 5,8kg/cm - 0,20sec/60°
Speed/Torque@ 6.0V : 7,6kg/cm - 0,16 sec/60°
Speed/Torque@ 7.4V : 8,8kg/cm - 0,13 sec/60°
Input Voltage : 4.8V - 8.4V
Harness length : 220mm
Compatibility : U" niversal connector
Dead band : 2μs (adjustable)
Features:
High end technology servo specially designed to be mounted in g"llider wings or every other demanding application.
Its small thickness allow it to be mounted in g"llider wings.
Full alu case, metal gears mounted on 2 BB combining reliability, p" recision and strength.
Package included:
1 x VOTIK 8525MG-D Metal Gear Steering Gear Digital Servo for RC Airplane Spare Part Fixed Wing
Nicely machined aluminium housing. Gear train has only small slack, runs not as quietly as higher priced servos, but still smooth.
Unfortunately the servo lever has too much slack on the output gear shaft, this makes the good mechanics worse than it could be. This shouldn't be tragic, because some thin alu foil pressed in there should reduce the slack.
Good value, I will order another one for further tests and try the servos for ailerons in a 2.5m GFK hang glider.