Tbaħħir standard b'xejn fuq ordnijiet ta' aktar minn $9.9
Politika tar-ritorn
Oġġetti jistgħu jintirbu sa 40 jum mill-data tar-riċeviment. Oġġetti personalizzati ma jistgħux jintirbu. Oġġetti mixtrija b'gift card jistgħu biss jinbidlu; ma jistgħux jintirbu.
Rigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.
Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.
1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.
2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.
Description:The fgr4S uses afhds3( Third Generation Automatic Frequency Hopping Digital System). It uses a internal single antenna with twoway transmission capabilities and is designed to be compact and easy to install, It can output standard PWM, i-BUS and PPM.
Material: Plastic and electronic componentsColor: BlackProduct Size: 25.5 22*17.3 mmProduct Weight: About 5.1gPackaging Weight: Approx.8gFit For: Flysky NB4 and PL18 transmitte
other components
i-BUS: for channel expansion
BIND: For bind cable
Certification: CE, FCC ID: N4ZFGRS400
Binding:
To ensure good signal strength, make sure the receiver antenna is as far away from any metal parts when installing the receiver
1. Insert the bind cable into the receivers BIND port;
2. Plug the power cable into any other port, and the the receiver"s LED will start to flash quickly indicating that it has entered bind mode
3. Put the transmitter into bind mode; (See the transmitter"sinstruction manual for more information
4. Binding is successful when the receiver"s LED starts to flash slowly. Remove the power and bind cables from the receiver. If the transmitter is bidirectional the reciever status indicatorwill not fash slowly
5. Reconnect the power cable to the receiver
6. Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operation follow the steps above to bind again