Specification:

Brand: Radiolink

Model: PIX6 Flight Controller

Optional mode: with GPS / Without GPS

Optional Version: for Airplane Helicopter ( Compatible with RC Airplane, Helicopter, RC Car, RC Boat)

for Multi-Rotor Copter ( Compatible with Multi-Rotor Copter )

Hardware Specification
Main Processor: STM32F765VIT6
Coprocessor: STM32F100

Sensor
Gyro & Accelerometer: BMI088,ICM-42688
E-compass: IST8310
Barometer: SPL06
RAM Memory: 512 KB
Flash Memory: 2MB
FRAM: 32KB, FM25V02A

Connector
Channel Output: 16 Channels Output(Main Outputs: 8 channel; Auxiliary Outputs: 8 channel )
Connector: POWER1,2 Port: HY-6P; DSM RC Port: XH1.25-3P; Debug Port: 1.0-8P; Other Port: GH1.25
CAN Port: 2
DSM RC: 1
Mavlink UART: 2
ADC: 3.3V*1&6.6V*1
OSD: 1
GPS UART: 2
Buzzer: 1
Safety Switch: 1
I2C Port: 1
SPI Port: 1
USB Port: 1
POWER Port: 2
Power1: voltage and current monitor inputs(Analog)
Power2: SMBUS/I2C Power Module Inputs(I2C)
Type-C Port: 1
SD Card Port: 1
FMU Reset: 1
Debug Port: 1
I/O Reset Button: 1
Signal (RC In): PPM/SBUS
Video Transmission: HD Digital and Analog Video Transmission Supported
RSSI Signal Input: PWM/3.3V
RSSI Signal Output: Support
OneShot/DShot: Support
OSD Module: Support, OSD Module Integrated
ESC Protocol: PWM/OneShot/DShot
Neopix Led Connection: Support
Gripper Function: Support

Power Module Specifications
RTK: Support
Weight: 24.5g (0.86oz) without wire
Input Voltage: 2-12S
Maximum Detection Current: 90A
Output Voltage(BEC): 5.3V± 0.2V
Output Current(BEC): 2A
Single ESC Maximum Detection Current: 22.5A

Adaptable Models
Airplane/2-8 Copters/Helicopter/Car/Boat/VTOL/Submarine/Radartracker/Robot/Mower

Specifications
Dimension: 95.5*51.5*15mm
Weight: 50g(without wires)
USB Voltage: 5V± 0.3V
Operating Temperature: -30~85℃

Features:
1.Open-source flight controller for all models.
2.Dual built-in gyro for enhanced stability.
3.Compatible with ArduPilot for advanced flight functions.
4.High-performance F765 flight controller.
5.Easy to install and configure.

Package Included:
1x PIX6(Flight Control)
1x Power Module(2-12S)
1x Safety Switch
1x Buzzer
2x Double-sided Adhesive Tape
1x 4G TF (MicroSD) Card
2x CAN1/2 Port Connect Cable
1x DSM RC Port Connect Cable
1x ADC 6V6 Port Connect Cable
1x ADC 3V3 Port Connect Cable
2x TELEM1/2 Port Connect Cable
1x OSD Port Connect Cable
2x GPS1/2 Port Connect Cable
1x SWITCH Port Connect Cable
1x I2C Port Connect Cable
1x SPI Port Connect Cable
1x POWER1 Port Connect Cable
1x POWERZ Port Connect Cable
1x Debug Port Connect Cable
1x Receiver Connect Cable
1x User Manual
1x USB Port Connect Cable
1x Type-C Cable
1x Packaging Color Box