Quite useful piece of equipment. Good quality cnc aluminium. The way to use it is rather straightforward. Couple of remarks: This is only a thrust meter, as clearly stated. Have to use your own wattmeter for watt, voltage, Amp readings. Connect one battery to wattmeter and one to the mayatech thrust meter. The switches are: on/off on the left, zero calibration on the right and unit change in the middle ( upper arrow points grams, down arrow ounces. The only difficulty I encountered is fixing motors on the Mayatech plate. Screw holes are somehow asymmetrical, certain times you just fit only 2 screws, not 4. Before fixing motor is better to take the fixing plate with arm off the device and fix motor on it, then screw the whole thing back on (see photo). Recommended if you already have a wattmeter. If not, buy the PRO version that includes it. Note: The included instruction manual is from the PRO version.

Неплохая заготовка для стенда, требует небольших доработок. Необходим отдельный измеритель мощности, например ToolkitRC WM150. Лучшим вариантом был стенд от LantianRC, но он больше не выпускается.

Not a bad base for the thrust stand, requires some modifications. A separate power meter is needed, such as the ToolkitRC WM150. The best option would be a thrust stand from LantianRC, but it is no longer in production.