Nemokamas standartinis pristatymas užsakymams virš $9.9
Grąžinimo politika
Prekės priimamos grąžinti per 40 dienų nuo gavimo datos. Individualios prekės negrąžinamos. Prekės įsigytos su dovanų kuponu gali būti tik keičiamos; grąžinimas negalimas.
Nemokama Dovana
Sveiki atvykę į Roymall, jūsų profesionalią dovanų parduotuvę. Vertiname jūsų paramą ir norėdami parodyti dėkingumą, siūlome nemokamą dovaną su kiekvienu užsakymu.
Pristatymo Politika
Prekės pristatomos per 2-5 darbo dienas. Užsakymai virš $9.9 pristatomi nemokamai.
1. Grąžinimo Politika
Prekės galima grąžinti per 40 dienų. Individualios prekės negrąžinamos.
2.Grąžinimo Sąlygos
Pinigai grąžinami originaliu apmokėjimo būdu.
Videos for similar product
Loading product videos...
❮
❯
Products related to this item
Loading related products...
❮
❯
Specification:
Size: approx.50x16x1mm
Maximum discharge current: 10A
Overcharge detection voltage: 4.25-4.35V±0.05V
Over-discharge detection voltage: 2.3-3.0V±0.05V
Maximum working current: 5A-8A
Transient current: 9A-10A
Operating temperature: -40~50℃
Storage temperature: -40~80℃
Quiescent current:<6uA
Internal resistance:< 60mΩ
Features:
Short circuit protection.
Overcharge protection.
Over-discharge protection.
Overcurrent protection.
Can be applied to various 3.7V lithium core.
Compact size and lightweight.
Fine workmanship and durable.
Ensure the security of battery pack.
Suitable for:
10.8V (Rated voltage of polymer battery)
11.1V (18650 or 3.7V lithium battery rated voltage)
Did a simple test to see if these boards have the fake AO4407 P- channel (SOP8) MOS-FET's as the ones I got from ebay. looks like these have good Fet's with low internal (drain- source ) resistance (RDS). it's nice not having to swap out the MOS-FET packs on a new BMS 🙂👍. I'm running ~30 watts trough the FET's and they are cold (been running for 30 min) The test load is some old 12V to 240V inverter that pulls too much in-rush current for the "eBay" BMS moduleswith the "fake" 4407 FET's , so the BMS enters shutdown mode. I know my wires aren't actually super conductors, but I did the same test with the ebay modules with the fake 4407 Fet's. I'm happy with this product. A tiny BMS that can handle high current : 3A-4A continously and 10A peak (with good wires).
Roymall C.o.
Nemokama dovana
Pristatymo politika
Grąžinimo politika
Coupon Code
Direct purchase from the factory 
Electronic Components & Supplies
Module Board
Battery Protection Module
