The Smart Oscilloscope Graph Multimeter is a high-capacity 3 in 1 multi-functional tool that functions as an oscilloscope, multimeter, and pencil, providing an integrated solution for complex electronic challenges.
This device is equipped with a 10MHz bandwidth and a 48MSa/s sampling frequency for full waveform measurements, delivering accurate and instant measurements.
The oscilloscope offers a positive input terminal and an advanced trigger mode which supports automatic, normal, single shot. The trigger edge functions on both rising and falling edges.
It comes with an easy-to-read 2.8" TFT color display and supports switching between English and Chinese, catering to a wide range of users globally.
Powered by a built-in 2000mAh lithium battery, this tool ensures extended usage time even in demanding working conditions.
Specifications:
Color: Green
Model: O1
Function: Oscilloscope, Multimeter, Electric Pen
Combination: Three-in-one graphical table
Display: 2.8" TFT Color Display
Power: Built-in 2000mAh lithium battery
Characteristics
Explanation
Bandwidth
10MHZ
Sampling frequency
48MSa/s
Input
Coupling
DC,AC
Impedance
1MQ
Ratio
x 1, x 10
Max voltage
± 300V
Horizontal
Sampling rate
1.5Sa/s - 48MSa/s
Sweep
100ns/div - 20s/div
Time base accuracy
20ppm
Sampling depth
64KB
Vertical
Sensitivity
200mV/div-100V/div
Low-frequency response
> 10Hz
Sampling depth
<10ns
Gain accuracy
± 3%
Measure
Automatic measurement
Frequency, period, peak to peak, maximum, minimum, rms value