Feature:

• 200/100/70MHz bandwidths

• 1GSa/s Real Time sample rate

• Large (7.0-inch) color display, WVGA(800x480)

• Record length up to 40K

• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.

• USB host and device connectivity, standard

• Multiple automatic measurements

• Four math functions, including FFTs standard

• Provides software for PC real-time analysis

• 
  
  Reviews(472)

  5.00

  Image 1 Positive 2

  • 
    FPVman
    5.0
    Very happy with the Hantek scope. Robust case, good size for the lab bench and looks good, even better than the photo's on the web site. Very easy to use without reference to the manual. All information is displayed on screen with an easy to use menu system on the right hand side of the screen that auto changes depending on what function is selected. Nice feature.
    
    Two good probes provided with x1 and x10 switch on each. Hook up a probe to the front panel test post and have a play - easy way to see all the different functions. Display is easy to use, very readable and with colour it is easy on the eye. Smooth controls, with ultra fine and coarse adjustment. Accuracy is within spec. A great buy for anybody interested in electronics. Thanks Banggood!
  • 
    BG482336410
    4.0
    Por incrível que pareça o produto depois que chegou ao Brasil foi entregue em menos de 15 dias. O que demorou mesmo foi o envio do produto da China para o Brasil, foi quase 1 mês para enviarem o Osciloscópio. Uma sugestão ao vendedor é que reforce a embalagem do produto mesmo que isso acrescente um custo ao cliente, pois a minha encomenda chegou com a caixa toda destruída e molhada. Liguei o equipamento e fiz as configurações iniciais. Até agora ele não apresentou nenhum defeito. Espero que continue assim, funcionando normalmente porque do jeito que o Osciloscópio chegou o meu maior medo era abrir a caixa e ver o equipamento todo quebrado ou o equipamento nem funcionar ao ligá-lo.
    • 
    • 
    • 
    • 
    • 
    • 
    • 
    • 

  See All Reviews

  Questions & Answers(87)

  Q: What kind of power plug will be provided? I am from US, so I will need a plug that can be used in the power outlets here (3 pin, 110V).

  3 answers

  Q: What is the operating power needed for this - is it EU ~240v or US 120v?

  3 answers

  Description

  

  

  

  

  

  

  

  

  

  

  Detail More+ ▼

  You also Interesting

  Tools Measurement & Analysis Instruments Digital Multimeters & Oscilloscope Oscilloscopes

  

  

  MSO5354 Mixed Signal Oscilloscope 350 MHz Analog Bandwidth 8 GSa/s Real-Time Sample Rate 200 Mpts Memory Depth High-Speed Waveform Capture

  4.9

  $3574.99 $12075.56

  1750

  

  

  SainSmart Micsig MHO3-2504 Digital Storage Oscilloscope 12-bit ADC 250MHz Bandwidth 3GSa/s Sampling Rate 14-inch Touch Screen High Resolution 4 Channels Low Noise USB Connectivity

  4.4

  $2470.99 $8001.98

  2124

  

  

  Micsig MOIP01P/MOIP02P SigOFIT 광 분리 프로브 100MHz/200MHz 탁월한 CMRR 고전압 성능 인버터 전력 변환기 설계를 위한 정확한 판독값 고대역폭 안전 테스트

  4.7

  $2304.99 $12198.78

  3485

  

  

  Micsig MDO2504 MDO3504 MDO5004 Digital Oscilloscope 4 Channel 250MHz 350MHz 500MHz Full Touch Screen High-Precision Signal Test Lab Oscilloscope Accurate Waveform Analysis

  4.6

  $1854.99 $4878.78

  2265

  

  

  ETO3504 ETO5004 Digital Oscilloscope 500MHz Bandwidth 4 Channels 3GSa/s High Sampling Rate Large Memory Depth USB Type-C HDM Fast Waveform Capture

  4.9

  $1824.99 $8538.78

  1885

  

  

  MSO5104 Mixed Signal Oscilloscope 100 MHz Bandwidth 4 Analog Channels 16 Digital Channels 8 GSa/s Sample Rate 200 Mpts Memory Depth High Speed Signal Capture

  4.7

  $1774.00 $2194.78

  1603

  

  

  MSO5074 혼합 신호 오실로스코프 70MHz 4채널 16개 디지털 채널 업그레이드 가능 대역폭 8GSa/s 샘플링 속도 높은 파형 캡처 속도 UltraVision II 아키텍처

  5.0

  $1404.99 $2073.99

  2778

  

  

  DG922 Pro 기능 임의 파형 발생기, 최대 출력 200MHz, 샘플링 속도 1.25Gsa/s, 16비트 해상도, 낮은 지터, 7인치 터치스크린, 현장 테스트를 위한 소형 휴대용 디자인

  4.8

  $1184.99 $7318.78

  5164

  

  

  Micsig CP3008 CP3005 CP1510 Current Probe DC 5MHz to 10MHz High Accuracy Universal BNC Interface Low Noise Fast Rise Time Maximum Conductor Diameter 20mm

  4.5

  $1089.99 $3658.78

  700

  

  

  Micsig CP503B 오실로스코프 고주파 전류 프로브 자동차 테스터 BNC 고주파 AC/DC 전류 프로브 50MHz

  4.4

  $939.99 $1171.19

  3498

  

  

  DHO914S 디지털 오실로스코프 125MHz 주파수 대역 4개 아날로그 채널 12비트 수직 분해능 1.25GSa/s 샘플링 속도 내장 신호 발생기 및 고급 디스플레이 기능

  4.2

  $654.99 $853.99

  3775

  

  

  연속 테스트 주파수가 최대 100kHz 또는 20kHz인 OWON LCR2000 시리즈 LCR 미터 0.05% 기본 정확도 빠른 측정 속도 고급 인터페이스 옵션 다양한 사용

  4.3

  $637.99 $927.19

  2369

  

  

  Micsig TO1004 TO2004 Tablet Digital Oscilloscope 4 Channel 100MHz 200MHz 10 inch Touchscreen High Sampling Rate Deep 220Mpts Memory Depth

  4.5

  $624.99 $1218.78

  1875

  

  

  DS1054Z 오실로스코프 디지털 4채널 50MHz 대역폭 1GS/s 7인치 WVGA 12Mpts 30,000wfm 오실로스코프

  4.3

  $613.99 $1096.78

  3008

  

  

  Micsig RCP60XS/RCP300XS/RCP600XS/RCP1200XS/RCP3000XS/RCP6000XS 오실로스코프 프로브 Rogowski 전류 프로브 2Hz-30MHz 최대 6000Apk 고정확도 2%

  4.8

  $599.99 $1218.78

  2174

  ×

  통화 선택

  언어 선택

  JOIN US

  최신 브랜드 소식과 첫 주문 시 15% 할인을 받으세요.

  구독

  ©2024 Roymall 맞춤형 흥미

  

  

  

  

  

  

  

  내 장바구니 장바구니 (3342)

  내 즐겨찾기 내 즐겨찾기 (0)

  ×

  

  Roymall Service

  Hi ?
  How can we help?

  Track Order status FAQ Complaint/Suggestion Contact support (10AM - 7PM ET)

  Home

  RoyBot Assistant 3

  QQ好友QQ空间新浪微博微信朋友圈百度贴吧复制链接

  取消

  Model	DSO5102P
  Acquisition
  Sample Rate	Real-Time Sample: 1GS/s
  Acquisition Modes
  Normal	Normal data only
  Peak Detect	High-frequency and randon glith capture
  Average	Wavefom Average, selectable 4,8,16,32,64,128
  Inputs
  Inputs Coupling	AC, DC, GND
  Inputs Impendance	1MΩ± 2%u201620pF± 3pF
  Probe Attenuation	1X, 10X
  Supported Probe Attenuation Factor	1X, 10X, 100X, 1000X
  Maximum Input Voltage	CAT I and CAT II: 300VRMS (10 x ), Installation Category; CAT III: 150VRMS (1 x ); Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.
  Horizontal System
  Sample Rate Range	500MS/s--1GS/s
  Waveform Interpolation	(sin x)/x
  Record Length	40K
  SEC/DIV Range	4ns/div to 40s/div
  Sample Rate and Delay Time Accuracy	± 50ppm(at over any ≥1ms time interval)
  Position Range	20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s
  Time Measurement Accuracy (Full Bandwidth)	Single-shot, Normal mode:± (1 sample interval +100ppm x reading + 0.6ns); >16 averages:± (1 sample interval + 100ppm x reading + 0.4ns); Sample interval = s/div ÷ 200
  Vertical System
  Vertical Resolution	8-bit resolution, all channel sampled simultaneously
  Position Range	2mV/div to 10V/div
  Bandwidth	100MHz
  Rise Time at BNC( typical)	3.5ns
  Analog Bandwidth in Normal and Average modes at BNC or with probe, DC Coupled	2mV/div to 20mV/div, ± 400mV; 50mV/div to 200mV/div, ± 2V 500mV/div to 2V/div, ± 40V; 5V/div, ± 50V
  Math	+, -, *, /, FFT
  FFT	Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman; 1024 sample point
  Bandwidth Limit	20MHz
  Low Frequency Response (-3db)	≤ 10Hz at BNC
  DC Gain Accuracy	± 3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ± 4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
  DC Measurement Accuracy, Average Acquisition Mode	When vertical displacement is zero, and N ≥16:± (3% x reading + 0.1div + 1mV) only 10mV/div or greater is selected; When vertical displacement is not zero, and N≥16: ± [3% x (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 5V/div
  Volts Measurement Repeatability, Average Acquisition Mode	volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions
  Trigger System
  Trigger Types	Edge, Video, Pulse, Slope, Over time, Alternative
  Trigger Source	CH1, CH2, EXT, EXT/5, AC Line
  Trigger Modes	Auto, Normal, Single
  Coupling Type	DC, AC, Noise Reject, HF Reject, LF Reject
  Trigger Sensitivity (Edge Trigger Type)	DC(CH1,CH2): 1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full; DC(EXT): 200mV from DC to 100MHz; 350mV from 100MHz to 200MHz; DC(EXT/5): 1V from DC to 100MHz;1.75V from 100MHz to 200MHz; AC: Attenuates signals below 10Hz; HF Reject: Attenuates signals above 80kHz LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz
  Trigger Level Range	CH1/CH2: ± 8 divisions from center of screen; EXT: ± 1.2V; EXT/5:± 6V
  Trigger Level Accuracy( typical)Accuracy is for signals having rise and fall times ≥20ns	CH1/CH2: 0.2div x volts/div within ± 4 divisions from center of screen; EXT: ± (6% of setting + 40mV); EXT/5: ± (6% of setting + 200mV);
  Set Level to 50%(typical)	Operates with input signals ≥50Hz
  Video Trigger
  Video Trigger Type	CH1, CH2: Peak-to-peak amplitude of 2 divisions; EXT: 400mV; EXT/5: 2V
  Signal Formats and Field Rates, Video Trigger Type	Supports NTSC, PAL and SECAM broadcast systems for any field or any line
  Holdoff Range	100ns ~ 10s
  Pulse Width Trigger
  Pulse Width Trigger Mode	Trigger when (< , >, = , or u2260); Positive pulse or Negative pulse
  Pulse Width Trigger Point	Equal: The oscilloscope triggers when the trailing edge of the pulse crosses the trigger level. Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width. Less than: The trigger point is the trailing edge. Greater than (also called overtime trigger): The oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width
  Pulse Width Range	20ns ~ 10s
  Slope Trigger
  Slope Trigger Mode	Trigger when (< , > , = , or u2260 ); Positive slope or Negative slope
  Slope Trigger Point	Equal: The oscilloscope triggers when the waveform slope is equal to the set slope. Not Equal: The oscilloscope triggers when the waveform slope is not equal to the set slope. Less than: The oscilloscope triggers when the waveform slope is less than the set slope. Greater than: The oscilloscope triggers when the waveform slope is greater than the set slope.
  Time Range	20ns ~ 10s
  Overtime Trigger
  Over Time Mode	Rising edge or Falling edge
  Time Range	20ns ~ 10s
  Alternative Trigger
  Trigger on CH1	Internal Trigger: Edge, Pulse Width, Video, Slope
  Trigger on CH2