Item Name

Specification

F722 Flight Controller

Mounting Hole Distance: 30.5*30.5mm

Weight: 9.5g

Main Processor: STM32F722RET6

Gyroscope: ICM42688

Barometer: SPL06-001

Flight Log Storage: 128MB, capable of storing flight log information

OSD Chip: AT7456E

Motor Communication: M1 - M8

DJI Air Unit Connector: Supported

Module Schematic Direct Connection: Supported

Flight Controller Firmware: Betaflight

Camera Menu Parameter Adjustment: Supported

Voltage Monitoring Compression: 110

UART Quantity: 5 UART Ports

ESC Telemetry Input: Supported

I2C: Supported

LED Pad: Supported

Buzzer Pad: Supported

RSSI Signal Detection: Supported

Firmware Type: Betaflight and INAV Firmware

Firmware Name: RADIOLINKF722

USB Port: 1 (Type-C)

Receiver Signals (RC IN): SBUS/CRSF

Supported ESC Protocols: Supported, with built-in image transmission OSD module

Buzzer Pad: PWM/Bi-directional DShot/OneShot

Power Input: 3-6S

BEC: 3.3V/300mA; 4.5V/500mA; 5V/3A; 12V/3A

12V BEC Switch: Supported (USER1 setting)

Operating Temperature: -30~85°C

BLS 4in1 55A ESC

Continuous Current: 55A

BEC: No

LiPo Cells: 3-6S

Weight: 15.8g

Dimensions (reference): 45x41x5.8mm

Mounting Hole: 30.5x30.5mm, M3

Configuration Software: Bluejay configurator or BLHeliSuite

Firmware: A-H-30