1. Work voltage: AC85-250V

2. Static conditions: less than 8mA

3. Work temperature: -40 degrees+80 degrees

4. Receive sensitivity: greater than -105dbm

5. Working frequency: 433MHz

6. Output voltage: input = output

7. Maximum load current: 10A

8. Size: 60.5 x 50 x 25.5mm

The jump line on the needle has changed the way of working

Switch: There are no two pins connecting the jumper.

Click: Press-> open; release-> off.

Self -locking: jumper connection pin 1 and 2.

Method: Press-> open; press the same button again-> Close ·

Mutual lock: jumper connection pin 2 and 3.

Relay: Press-> open; press other buttons-> Close.

Learn: Press the learning button for 4-6 seconds, the indicator lights go out, release the finger, press any button on the remote control, the indicator lights flickered 5 times, indicating that the learning is successful.

Clear: Press the learning button for about 8 seconds, the indicator light from OFF to ON, and then press the remote control. The relay does not respond, indicating that the code is successful.

1. button: 1 button

2. Work voltage: DC6V (use 2PCS CR2016, not includes)

3. Work frequency: 433MHz

4. Remote distance: 20-50M

5. Work current: 13 mAh time

6. Code: EV1527 code

7. Size: 5.7 x 3.2 x 1.1cm

1 x Remote

1 x Receiver