Description:The fgr4S uses afhds3( Third Generation Automatic Frequency Hopping Digital System). It uses a internal single antenna with twoway transmission capabilities and is designed to be compact and easy to install, It can output standard PWM, i-BUS and PPM.
Material: Plastic and electronic componentsColor: BlackProduct Size: 25.5 22*17.3 mmProduct Weight: About 5.1gPackaging Weight: Approx.8gFit For: Flysky NB4 and PL18 transmitte
other components
i-BUS: for channel expansion
BIND: For bind cable
Certification: CE, FCC ID: N4ZFGRS400
Binding:
To ensure good signal strength, make sure the receiver antenna is as far away from any metal parts when installing the receiver
1. Insert the bind cable into the receivers BIND port;
2. Plug the power cable into any other port, and the the receiver"s LED will start to flash quickly indicating that it has entered bind mode
3. Put the transmitter into bind mode; (See the transmitter"sinstruction manual for more information
4. Binding is successful when the receiver"s LED starts to flash slowly. Remove the power and bind cables from the receiver. If the transmitter is bidirectional the reciever status indicatorwill not fash slowly
5. Reconnect the power cable to the receiver
6. Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operation follow the steps above to bind again
Roymall C.o.
無料ギフト
配送ポリシー
返品ポリシー
Coupon Code
Direct purchase from the factory 
Radios & Receiver
RC Parts
