- Uses advanced electronic components and high-quality wear-resistant shaft

- Long working life, continuous power-on working time of more than 10,000 hours.

- It is smooth operation, high efficiency, good performance.

- Small volume, low noise, safety and environmental protection.

Name: Water Pump

Model: ZYW520

Materials: ABS

Voltage: DC12V

Power: 6W

Maximum Rated Current: 1000MA

Flow Rate:500L/h(Max.)

Max Water lift: 2 metre

Maximum speed: 8000rpm

Pump outlet diameter: ID: 6.3mm, OD: 8.5mm

Pump inlet diameter: ID: 10mm, OD: 12.5mm

Working environment temperature: 1-70 ℃

Noise: < 35 db (water) under operation

Drive mode: Brushless, magnetic isolation

Conveying medium: Water, oil, and other acid-base solution

Pump shaft position: horizontal

Impeller structure: open impeller

Impeller suction method: single suction type

Waterproof rating: IP68 (dive installation)

Cable line: 50cm

Size: About 5.2x3.3x3.6cm/2.05x1.3x1.4in

1 x Brushless Motor Water Pump

The water pump cable (the red thread is positive, do not take the wrong) received a suitable power supply (the battery can be a battery, it can be a power converter), and then a good water pipe, then pump into the water, Can be used normally.

(Note: The DC brushless pump is a centrifugal pump, the pump water flow with the increase of the head decreases.No diving without self-priming function, prohibit no water free.)

1. The pump flow is reduced or no water. (The pump chamber can be disassembled for cleaning).

2. When the pump does not run water. (There is air in the pump or in the pipeline.)

1.Do not take the wrong pump positive and negative.

2.Prohibit not through the power converter will be connected directly to the 220V power supply pump.

3.Is strictly prohibited for strong acidity, alkali and other damage to the pump medium.

4.The pump is suitable for medium temperature 1 ℃ -60 ℃.