1.SONOFF Zigbee3.0 USB Dongle is a universal Zigbe USB stick. It can be used as a universal Zigbe gateway in Home Assistant or other open-source platforms via ZHA or Zigbe2MQTT to locally control all your Zigbe sub-devices, so you don"t need to invest in the Zigbe hubs for different brands, all you need is a universal gateway - Dongle Plus!2.The dongle plus has a wide range of supported devices, such as BASICZBR3, S31 Lite zb, SNZB01, SNZB02, SNZB03, SNZB04, ZBMINI, S26R2ZB , and various sub-devices from various brands or flash router firmware to extend the network range.3.The limits of ZBDongle are 21 direct sub-devices and up to 40 sub-devices (Default values from official firmware). Supported to connect more by configurating yourself.*Updated version (in the near future) will be supported to work with maximum 200 sub-devices
Specifications:
Pre-flashed with Z-Stack 3.x.0 coordinator firmwareCan use ZHA in Home Assistant or use Zigbe2MQTTBase on TI EFR32MG2120dBm output gainSMA interface external antennaAluminum housing effectively reduces signa1 interference from peripheralsOptional 1.5m USB extension cable for better signal range
Perfect werkende zigbee 3.0 usb dongle. Je gebruikt die best met een usb verlengkabel in plaats van deze direct op een RPI usb poort te steken: dan zal het systeem nog beter presteren omwille van minder interferentie.
Bought it as backup for the one with zigbee2mqtt already installed in Home Assistant. Worked like charm just by changing the path in configuration, but some devices need to be paired again, not by deleting them but activating permit join and put them in pairing state.