Back

iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 マルチプロトコル ARM TX モジュール（ケース付き）

iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 マルチプロトコル ARM TX モジュール（ケース付き）

Roymall C.o.

$27.99 /$43.91

4.81096

Shipping to: United States

Express: 7-12 business days

Standard: 15-25 business days

location

カートに追加今すぐ購入

$35.99 /$43.91

Coupon Code

Direct purchase from the factory

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

Credit or Debit Card

安全なチェックアウト

無料ギフト

購入ごとに無料ギフト

配送ポリシー

9.9ドル以上の注文で標準配送無料

返品ポリシー

返品は商品受領日から40日以内に受け付けます。カスタマイズ商品は返品または交換できません。Eギフトカードで購入した商品は交換のみ可能で、返金は適用されません。

無料ギフト

Roymallへようこそ、プレミアムデパートメントストアギフトを購入するための専門ウェブサイトです。私たちはあなたのサポートを高く評価し、感謝の気持ちを込めて、購入ごとに特別な無料ギフトをお届けします。私たちと一緒にショッピングを楽しむことで、ライフスタイルを向上させる高品質な製品を楽しむだけでなく、注文ごとに特別な無料ギフトも受け取ることができます。私たちのコレクションを探索して、完璧なギフトを見つける準備はできましたか？プレミアムデパートメントストアアイテムのセレクションを閲覧し、注文をして、購入品と一緒に無料ギフトが届くのを楽しみにしてください。

配送ポリシー

注文を受領後、商品を安全にお届けするために努めます。配送詳細は確認メールに記載されます。ほとんどの場合、注文は2日以内に処理されます。特別な状況下では、以下のように遅れることがあります：土曜日、日曜日、または祝日に注文をした場合、2日遅れます。通常、飛行機の遅延やその他の環境要因の影響を受けない場合、5〜7営業日（月曜日から金曜日）かかります。私たちの配送サービスは世界中に及ぶため、配送時間はあなたの場所によって異なります。遠隔地や国の場合は数日かかる場合がありますので、お待ちください。

1. 返品・交換ポリシー

私たちはroymall.comで購入した商品のみ受け付けます。地元のディストリビューターや他の小売店で購入した商品は返品できません。最終販売商品や無料ギフトは返品できません。返品の対象となるためには、商品は未使用で受け取ったときと同じ状態でなければなりません。また、元のパッケージに入っている必要があります。返品手順を受け取った後、返品商品をパッケージに詰めて地元の郵便局または別の宅配業者に渡してください。
返品または交換商品を受け取った後、3〜5営業日以内に処理します。返金は自動的に元の支払い方法に反映されます。カスタムサイズ、カスタムカラー、カスタムプリントなどのカスタム製品は返品または交換できません。さらにヘルプが必要な場合は、お問い合わせください。 service@roymall.com またはWhatsapp: +447549870296

2.返金ポリシー

返品パッケージを受け取り、確認した後、全額返金または100％ストアクレジットを受け取ります。返金は自動的に元の支払い方法に反映されます。配送料や関税、手数料は返金対象外です。パッケージが発送された後、追加の配送料は返金できません。これらの費用を支払う責任があり、私たちはそれらを免除または返金することはできません。返品商品を受け取り、確認した後、返品商品を受け取ったことを通知するメールを送信します。また、返金の承認または拒否についても通知します。返金プロセスに関する問題がある場合は、お問い合わせください。 service@roymall.com またはWhatsapp: +447549870296

Videos for similar product

Loading product videos...

❮

❯

Products related to this item

Loading related products...

❮

❯

iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol ARM TX Module With Case

Description:
The 4 in 1 wireless module integrate four RF chips (CC2500,NRF24L01,A7105,CYRF6936) into one single circuit board,with MCU baseplate,can support a variety of remote control protocols by identifying the PPM signal output of the remote control,such as Walkera DEVO,Spektrum DSM2,Flysky,Frsky,WLToys,Hubsan,Hisky,etc. It can control up to several hundreds airplanes (or receivers).

This module can recognize the remote control PPM signal, then converted into the corresponding standard wireless remote control format,which means that in theory as long as the remote control is with analog functions, it can work.

This Multiprotocol TX Module is the ARM board, all protocols are included. It is suitable for many brand"s quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert the TX Module to your Frsky X9D/X9D Plus/X12S,flysky TH9X,Turnigy 9XR/9XR PRO transmitter. As long as your transmitter can use the Open TX firmware,it is compatible with this module. You will get many new ways to control the RC models.

Specification:

Brand Name: iRangeX
Item Name: IRX4
Band: 2.4G
Weight: About 40g
Firmware: ARM
Dimension: About 49x22x65mm
Antenna Length: About 108mm

Compatible Transmitter:
Frsky: All the frsky transmitter
Futabas: Futabas S-FHSS transmitter
Flysky: TH9X (Note: The plastic base of the pins on the transmitter needs to be removed to fit this module.)
Turnigy: 9XR,9XR Pro
Others: Other transmitter that can use the Open TX firmware.

Compatible RC Aircrafts:
Supported Brand :Cheerson,Syma,Wltoys , Eachine E010(Most of these brand"s quadcopters, helicopters and airplanes are compatible but not every model.).

Features:
- Upgraded ARM board,all protocols are included.
- For OrangeTX, all CYRF6936 based protocols are included.
- Suitable for many brand"s quadcopters,helicopters and airplanes .
- Multiprotocol TX module,as long as your transmitter can use the Open TX firmware,then it is compatible with module.
- Multiprotocol hexs/bin files attached have been compiled with the source files dated of 19/12/2016 using the default settings AETR, telemetry enabled, serial mode enabled and ppm mode enabled using default table. INV versions have inverted telemetry set which is a must for OpenTX while the others are compatible with er9x/ersky9x.
- For Atmega328 boards, some RF modules (and associated protocols) have been included in each hexs to fit in the Atmega328. For example Multiprotocol_V1.1.5_A7105-CC2500-CYRF6936.hexs means that protocols depending on NRF24L01 protocols are excluded.

Pin Function:

Number	Name	Property	Description
1	VCC	Power	3.3V Power supply
2	GND	Power	ground
3	PE1	input	Amplifier and antenna switching signal. See the truth table
4	PE2	input	Amplifier and antenna switching signal. See the truth table
5	CSN1	input	A7105 chip select signal
6	CSN2	input	CC2500 chip select signal
7	CSN3	input	NRF24L01 chip select signal
8	CSN4	input	CYRF6936 chip select signal
9	SCK	input	SPI clock signal
10	MOSIs	input	SPI input for slave device
11	MISO	output	SPI output for slave device
12	CYRF_RST	input	CYRF6936 Reset
16	RFO	in/out	RF signal input/output, connect to antenna
others	GND	Power	ground

Truth Table:

status	PE1	PE2
A7105 RF signal to antenna	0	0
CC2500 RF signal to antenna	0	1
NRF24L01 RF signal to antenna	1	0
CYRF6936 RF signal to antenna	1	1

Supported Protocols:
- Flysky (Generation I protocol,based on A7105,tested)
- Hubsan (Based on A7105,tested)
- Frsky (Based on CC2500,tested)
- Hisky (Based on24L01,tested)
- V2x2 (Based on 24L01)
- Dsm2 (Based on CYRF6936,tested)
- Devo (Based on CYRF6936,tested)
- YD717 (Based on 24L01 )
- KN (V977,Based on 24L01,tested)
- SymaX (Based on 24L01)
- SLT (Based on 24L01)
- CX10 (Based on 24L01)
- CG-023
- BAYANG
- SIMAX5C

Note:
The above protocols are transplanted from open source projects based on the remote control Walkera DEVIATION,the the original author have tested almost the protocols,but he is not specially test for this 4 in 1 wireless module,the protocols our supplier tested have been stated above,untested protocols does not rule out is not supported,but there may be a problem of program configuration,so not rule out the subsequent firmware can support.

Open source protocol is mostly cracked,protocol version is constantly updated,inevitably there are omissions. Including but not limited to the following issues:
- Part program version DSM2 have protocol compatibility problems.
- Some receiver (original AR600) need to rebind per use,some receiver (Spektrum integrated receiver) frame rate is a bit slow. This issue basically determine the problem is on the program itself.

Tested Ground Control Distance:
CC2500: V8FR receiver with Frsky protocol,about 240m.
A7105: WLToys V911 helicopter with Flysky 8 ch receiver,based on Flysky protocol,about 240m.
CYFR6936: Spektrum MCPX helicopter with DSM2 protocol,Walkera SUPERCP helicopter with DEVO protocol,about 200m,
NRF24L01: WLToys V977 helicopter with KN protocol,use Walkera DEVO transmitter,about 200m (If equipped with MCU baseplate,only 50m). Hisky HCP100S helicopter with Hisky protocol,about 70m.

Supported Protocols & Models Table, Click Here

Package Included:
1x iRangeX IRX4 module (With antenna and case)

Differences Between Versions:

Version	IRX1	IRX4	IRX4 Plus
A7105 chip		u221a	u221a
CC2500 chip		u221a	u221a
NRF24L01 chip	u221a	u221a	u221a
CYRF6936 chip		u221a	u221a
VCC Power: 3.3V Power supply			u221a
Ground Control Distance	200m	240m	240m
PPM			u221a
Operating Voltage	5-13V	5-14V	5-14V
Operating Current	<=40mA	<=100mA	<=100mA
perating Frequency: 2.4G ISM band	u221a	u221a	u221a
RF Power: 22dBm	u221a	u221a	u221a
Firmware: ARM CORTEX-M	u221a	u221a	u221a
Dimension: 49x22x65mm	u221a	u221a	u221a
Weight	43g	40g	45g
Antenna Length: About 108mm	u221a	u221a	u221a

Reviews(597)

4.90

tubby

5.0

Having bought a Taranis transmitter for its sheer versatility, I had to have one of these to go with it. Like the transmiter, it comes without any instructions and there is no link to an on-line manual. Fortunately, there are how-to videos on Youtube, but they only scratch the surface. The first hurdle is to get around the complexity of setting up the transmitter to use the module. You immediately find that the transmitter will not even recognise the module until you download and install the latest firmware for the transmitter. You then have to negotiate the various menus to turn off the internal RF module and initiate the external module. You can then select the appropriate model type. Maybe I'm missing something, but not all of the listed model protocols are supported, although the menu structure is so complex that it easy to miss something. I also found that not all of the listed types will actually work. Here is a summary of my experiences:
HISKY - It would bind but only gave erratic and intermitent control. I tried this with three different receivers with the same result.
DSM2 - If you select 'DSM2' from the menu, it won't work. You have to select 'MULTI' and then scroll through to 'DSM'. You can then select from 'S 11ms', 'S 22ms', 'X 11ms' and 'X 22ms'. 'S 22ms' works with all my models, 'DSM2' and 'DSMX'. (Control order: TAER).
Eachine QX80/QX95 - no problem. (Control order: TAER).
JXD392 quadcopter - It would bind, but the control order was jumbled and no amount of variations in the transmitter order made any difference. It seems there was a bug in the firmware I dowmloaded. When a later version became available, the setup wizard now worked and I was able to correct this. (Control order: AETR).
Nine Eagles P51 - no problem. (Control order: TAER - aileron reversed).
Hubsan X4 and Q4 - no problem. (Control order: AETR - aileron and rudder recersed).
Eachine H8S 3D - no problem. (Control order: AETR).
With all the quadcopters it is necessary to use an oscilloscope to establish the use of the other features. Most of these use pushbuttons and the Taranis doesn't have any, so you have to find tour own workaround for this.
Both this module and the Taranis transmitter are not exactly user-friendly. Both need detailed instructions. The transmitter 'Manual' makes no mention of programming. I still don't know what the two lights on the module are for.
In short, it will work with most things, except HiSky, but you may need a lot of experimentation and trial and error to get a particulr model to work.
Its worth noting that all of the above will bind and work perfectly with my modified Devo 7e.
Babay

5.0

Модуль позволяет сделать передатчик Таранис или любой другой с прошивкой OpenTX 2.2 по настоящему универсальным. Прошивка модуля сделана на основе Deviation. Модуль поддерживает большинсво современных моделей. Выбор протокола управления осуществляется прямо из меню передатчика. Есть даже поддержка протокола FrSky с телеметрией! И да, этот модуль мощнее, чем встроенный в передатчик в Таранисе:)