Spedizione standard gratuita per ordini superiori a $9.9
Politica di reso
Gli articoli resi saranno accettati entro 40 giorni dalla data di ricezione della merce. Gli articoli personalizzati non possono essere restituiti o scambiati. Gli articoli acquistati con una carta regalo elettronica sono solo scambiabili; i rimborsi non sono applicabili.
Regalo gratuito
Benvenuto su Roymall, il tuo sito professionale per l'acquisto di regali premium da grandi magazzini. Apprezziamo molto il tuo supporto e vogliamo esprimere la nostra gratitudine aggiungendo un tocco extra di eccitazione ai tuoi acquisti. Quando fai acquisti con noi, non solo godi di prodotti di alta qualità che migliorano il tuo stile di vita, ma riceverai anche un regalo esclusivo con ogni ordine che effettui. Pronto a esplorare la nostra collezione e trovare i tuoi regali perfetti? Sfoglia la nostra selezione di articoli premium da grandi magazzini, effettua il tuo ordine e attendi con impazienza l'arrivo del tuo regalo gratuito insieme al tuo acquisto.
Politica di spedizione
Ci impegneremo a consegnarti gli articoli dopo aver ricevuto i tuoi ordini e assicurarci che arrivino in sicurezza. I dettagli di consegna saranno forniti nella tua email di conferma.Nella maggior parte dei casi, gli ordini vengono elaborati entro 2 giorni. In circostanze speciali, potrebbe essere ritardato come segue: Quando effettui un ordine il sabato, la domenica o nei giorni festivi, sarà ritardato di 2 giorni.Normalmente, sono necessari 5-7 giorni lavorativi (da lunedì a venerdì) senza essere influenzati da ritardi nei voli o altri fattori ambientali.Poiché il nostro servizio di spedizione è globale, i tempi di consegna dipenderanno dalla tua posizione, quindi potrebbe richiedere alcuni giorni e ti chiediamo pazienza se ti trovi in distretti o paesi remoti.
1. Politica di reso e scambio
Accettiamo solo articoli acquistati su roymall.com. Se acquisti dai nostri distributori locali o altri rivenditori, non puoi restituirli a noi.Gli articoli in vendita finale o i regali gratuiti non sono accettati per il reso.Per essere idoneo al reso, il tuo articolo deve essere inutilizzato e nelle stesse condizioni in cui lo hai ricevuto. Deve anche essere nella confezione originale.Dopo aver ricevuto le istruzioni di reso da parte nostra, per favore impacchetta gli articoli resi e consegna il pacco all'ufficio postale locale o a un altro corriere. Elaboreremo il tuo reso o scambio dell'articolo entro 3-5 giorni lavorativi dopo averlo ricevuto. Il rimborso verrà elaborato e accreditato automaticamente sul tuo metodo di pagamento originale.Non sono accettati resi o scambi se il prodotto è stato prodotto su misura, inclusa la dimensione personalizzata, il colore personalizzato o la stampa personalizzata.Hai bisogno di ulteriore aiuto? Contattaci. service@roymall.com o Whatsapp: +447549870296
2. Politica di rimborso
Riceverai un rimborso completo o un credito del 100% dopo che avremo ricevuto e verificato il pacco restituito. Il rimborso verrà elaborato e accreditato automaticamente sul tuo metodo di pagamento originale.Si prega di notare che i costi di spedizione e qualsiasi dazio o tassa non sono rimborsabili. I costi di spedizione aggiuntivi non sono rimborsabili una volta che il pacco è stato spedito. Sei responsabile del pagamento di queste tasse e non possiamo esentarle o rimborsarle, anche se l'ordine ci viene restituito.Dopo aver ricevuto e confermato il tuo articolo restituito, ti invieremo un'email per informarti che abbiamo ricevuto il tuo articolo restituito. Ti informeremo anche sull'approvazione o il rifiuto del tuo rimborso.Se hai problemi con il processo di rimborso, contattaci. service@roymall.com o Whatsapp: +447549870296
Videos for similar product
Loading product videos...
❮
❯
Products related to this item
Loading related products...
❮
❯
iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol ARM TX Module With Case
Description: The 4 in 1 wireless module integrate four RF chips (CC2500,NRF24L01,A7105,CYRF6936) into one single circuit board,with MCU baseplate,can support a variety of remote control protocols by identifying the PPM signal output of the remote control,such as Walkera DEVO,Spektrum DSM2,Flysky,Frsky,WLToys,Hubsan,Hisky,etc. It can control up to several hundreds airplanes (or receivers).
This module can recognize the remote control PPM signal, then converted into the corresponding standard wireless remote control format,which means that in theory as long as the remote control is with analog functions, it can work.
This Multiprotocol TX Module is the ARM board, all protocols are included. It is suitable for many brand"s quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert the TX Module to your Frsky X9D/X9D Plus/X12S,flysky TH9X,Turnigy 9XR/9XR PRO transmitter. As long as your transmitter can use the Open TX firmware,it is compatible with this module. You will get many new ways to control the RC models.
Specification:
Brand Name: iRangeX Item Name: IRX4 Band: 2.4G Weight: About 40g Firmware: ARM Dimension: About 49x22x65mm Antenna Length: About 108mm
Compatible Transmitter: Frsky: All the frsky transmitter Futabas: Futabas S-FHSS transmitter Flysky: TH9X (Note: The plastic base of the pins on the transmitter needs to be removed to fit this module.) Turnigy: 9XR,9XR Pro Others: Other transmitter that can use the Open TX firmware.
Compatible RC Aircrafts: Supported Brand :Cheerson,Syma,Wltoys , Eachine E010(Most of these brand"s quadcopters, helicopters and airplanes are compatible but not every model.).
Features: - Upgraded ARM board,all protocols are included. - For OrangeTX, all CYRF6936 based protocols are included. - Suitable for many brand"s quadcopters,helicopters and airplanes . - Multiprotocol TX module,as long as your transmitter can use the Open TX firmware,then it is compatible with module. - Multiprotocol hexs/bin files attached have been compiled with the source files dated of 19/12/2016 using the default settings AETR, telemetry enabled, serial mode enabled and ppm mode enabled using default table. INV versions have inverted telemetry set which is a must for OpenTX while the others are compatible with er9x/ersky9x. - For Atmega328 boards, some RF modules (and associated protocols) have been included in each hexs to fit in the Atmega328. For example Multiprotocol_V1.1.5_A7105-CC2500-CYRF6936.hexs means that protocols depending on NRF24L01 protocols are excluded.
Pin Function:
Number
Name
Property
Description
1
VCC
Power
3.3V Power supply
2
GND
Power
ground
3
PE1
input
Amplifier and antenna switching signal. See the truth table
4
PE2
input
Amplifier and antenna switching signal. See the truth table
5
CSN1
input
A7105 chip select signal
6
CSN2
input
CC2500 chip select signal
7
CSN3
input
NRF24L01 chip select signal
8
CSN4
input
CYRF6936 chip select signal
9
SCK
input
SPI clock signal
10
MOSIs
input
SPI input for slave device
11
MISO
output
SPI output for slave device
12
CYRF_RST
input
CYRF6936 Reset
16
RFO
in/out
RF signal input/output, connect to antenna
others
GND
Power
ground
Truth Table:
status
PE1
PE2
A7105 RF signal to antenna
0
0
CC2500 RF signal to antenna
0
1
NRF24L01 RF signal to antenna
1
0
CYRF6936 RF signal to antenna
1
1
Supported Protocols: - Flysky (Generation I protocol,based on A7105,tested) - Hubsan (Based on A7105,tested) - Frsky (Based on CC2500,tested) - Hisky (Based on24L01,tested) - V2x2 (Based on 24L01) - Dsm2 (Based on CYRF6936,tested) - Devo (Based on CYRF6936,tested) - YD717 (Based on 24L01 ) - KN (V977,Based on 24L01,tested) - SymaX (Based on 24L01) - SLT (Based on 24L01) - CX10 (Based on 24L01) - CG-023 - BAYANG - SIMAX5C
Note: The above protocols are transplanted from open source projects based on the remote control Walkera DEVIATION,the the original author have tested almost the protocols,but he is not specially test for this 4 in 1 wireless module,the protocols our supplier tested have been stated above,untested protocols does not rule out is not supported,but there may be a problem of program configuration,so not rule out the subsequent firmware can support.
Open source protocol is mostly cracked,protocol version is constantly updated,inevitably there are omissions. Including but not limited to the following issues: - Part program version DSM2 have protocol compatibility problems. - Some receiver (original AR600) need to rebind per use,some receiver (Spektrum integrated receiver) frame rate is a bit slow. This issue basically determine the problem is on the program itself.
Tested Ground Control Distance: CC2500: V8FR receiver with Frsky protocol,about 240m. A7105: WLToys V911 helicopter with Flysky 8 ch receiver,based on Flysky protocol,about 240m. CYFR6936: Spektrum MCPX helicopter with DSM2 protocol,Walkera SUPERCP helicopter with DEVO protocol,about 200m, NRF24L01: WLToys V977 helicopter with KN protocol,use Walkera DEVO transmitter,about 200m (If equipped with MCU baseplate,only 50m). Hisky HCP100S helicopter with Hisky protocol,about 70m.
Having bought a Taranis transmitter for its sheer versatility, I had to have one of these to go with it. Like the transmiter, it comes without any instructions and there is no link to an on-line manual. Fortunately, there are how-to videos on Youtube, but they only scratch the surface. The first hurdle is to get around the complexity of setting up the transmitter to use the module. You immediately find that the transmitter will not even recognise the module until you download and install the latest firmware for the transmitter. You then have to negotiate the various menus to turn off the internal RF module and initiate the external module. You can then select the appropriate model type. Maybe I'm missing something, but not all of the listed model protocols are supported, although the menu structure is so complex that it easy to miss something. I also found that not all of the listed types will actually work. Here is a summary of my experiences:
HISKY - It would bind but only gave erratic and intermitent control. I tried this with three different receivers with the same result.
DSM2 - If you select 'DSM2' from the menu, it won't work. You have to select 'MULTI' and then scroll through to 'DSM'. You can then select from 'S 11ms', 'S 22ms', 'X 11ms' and 'X 22ms'. 'S 22ms' works with all my models, 'DSM2' and 'DSMX'. (Control order: TAER).
Eachine QX80/QX95 - no problem. (Control order: TAER).
JXD392 quadcopter - It would bind, but the control order was jumbled and no amount of variations in the transmitter order made any difference. It seems there was a bug in the firmware I dowmloaded. When a later version became available, the setup wizard now worked and I was able to correct this. (Control order: AETR).
Nine Eagles P51 - no problem. (Control order: TAER - aileron reversed).
Hubsan X4 and Q4 - no problem. (Control order: AETR - aileron and rudder recersed).
Eachine H8S 3D - no problem. (Control order: AETR).
With all the quadcopters it is necessary to use an oscilloscope to establish the use of the other features. Most of these use pushbuttons and the Taranis doesn't have any, so you have to find tour own workaround for this.
Both this module and the Taranis transmitter are not exactly user-friendly. Both need detailed instructions. The transmitter 'Manual' makes no mention of programming. I still don't know what the two lights on the module are for.
In short, it will work with most things, except HiSky, but you may need a lot of experimentation and trial and error to get a particulr model to work.
Its worth noting that all of the above will bind and work perfectly with my modified Devo 7e.
Модуль позволяет сделать передатчик Таранис или любой другой с прошивкой OpenTX 2.2 по настоящему универсальным. Прошивка модуля сделана на основе Deviation. Модуль поддерживает большинсво современных моделей. Выбор протокола управления осуществляется прямо из меню передатчика. Есть даже поддержка протокола FrSky с телеметрией! И да, этот модуль мощнее, чем встроенный в передатчик в Таранисе:)