Radiolink R12DS V2.0 2.4GHz 12CH DSSS FHSS Receiver for AT9/AT9S/AT9S PRO/AT10/AT10II Radio Transmitters

Specification:
Brand: Radiolink
Models: Radiolink R12DS V2.0 2.4G 12CH Receiver
Channel: 11CH in PWM signal mode; 12CH in SBUS signal mode
Working Voltage: 3.6~12V (support high-voltage servos)
Working Current: 38-45mA (input voltage 5V)
Resolution: 4096, 0.25us high precision per level
Remote Control Distance: About 4KM in the air (the actual control distance is related to the flight environment)
Dimensions: Length*Width*height=50*31.5*14.5 MM
Weight: 14g

Feature:
1. Integrated signal strength, receiver voltage data feedback and RSSI value, and supports external feedback module PRM-01, feedback power battery voltage information, with OSD feedback module PRM-03, feedback latitude and longitude, number of stars, distance, climb, speed and other information.
2. Resolution: 4096, 0.25us high precision per level, so that all servos are as still as water;.
3. Support SBUS and PWM signal output at the same time.
4. Dual antennas, full-angle signal coverage, not afraid of complex flight environment in hilly areas, fruit forest and tea garden plant protection is more assured.
5. 4000 meters remote control distance: true FHSS and DSSS dual spread spectrum, 16-channel pseudo-random sequences frequency hopping, to achieve superior anti-multipath interference and same-band interference capabilities, suitable for multiple people at the same time in the same competition, stable remote control distance of 4000 meters in the air.

Code:
Each transmitter has an independent ID code. Before using the device, the receiver must be paired with the transmitter. After pairing, the ID code is stored in the receiver and does not need to be paired again. When you purchase a new R12DS receiver, you must pair it again, otherwise the receiver will not work properly.
1. Place the transmitter and receiver close together.
2. Turn on the transmitter power switch and power on the receiver.
3. Press the (ID SET) switch on the side of the receiver for more than 1 second, and the red indicator light starts to flash, indicating that pairing has begun.
4. When the red indicator light on the receiver stops flashing and becomes solid, pairing is complete. If pairing is unsuccessful, the red indicator light on the receiver will flash slowly as a reminder.

Package included:
1x Radiolink R12DS V2.0 2.4GHz 12CH Receiver