בחר מטבע
בחר שפה
Roymall C.o.
תשלום מאובטח
מתנה חינם
מדיניות משלוחים
מדיניות החזרהNote: Pre-installed with BL32 test firmware, extensively tested for safety and reliability(AM32 also supported; customer flashing required.)
Feature:
1. Use mainstream STM32F722 chip
2. Equipped with the latest 42688-P gyroscope
3. 512M black box storage
4. Support Bluetooth parameter tuning
5. Integrated LC filter
6. Upgrade type-C USB interface
7. With GEP-BL32 50A 96K 4IN1 32Bit ESC, silky flight
8. Directly plugs into the DJI Air Unit
9. Simple and effective installation with shock-absorbing mounts for stable gyroscope performance
10. Integrated Barometer
11. 9V@2.5A + 5V@3A dual independent BEC
Specification:
Brand: GEPRC
Model: TAKER F722 BT 32Bit 50A STACK
Model | Specification |
F722 BT HD V3 Flight Controller | MCU: STM32F722 IMU: ICM42688-P(SPI) Air Unit Connection: Directly plugs into the DJI Air Unit Black Box: 512M onboard Bluetooth: Supported Barometer: Supported USB Interface: Type-C OSD: BetaFlight OSD w/ AT7456E chip BEC: 5V@3A, 9V@2.5A dual BEC Firmware Target: GEPRCF722_BT_HD_V3 Size: 36.9 x 36.9mm, hole: 30.5 x 30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing ring Input Voltage: 3-6S LiPo UART: 5 groups (UART4 fixed for Bluetooth) Power Filter: Integrated LC filter Weight: 8.2g |
50A 4IN1 ESC | Input Voltage: 3-6S Lipo Continue Current: 50A Burst Current: 55A (5 second) Galvanometer: Support Telemetry: Support Support Protocol: Dshot 150/300/600 Size: 42.5 x 42.1mm,hole30.5 x 30.5mm Weight: 14g Target: ST_G0_05 – 31.92 |
Package Included:
1 x FC board
1 x ESC board
1 x Capacitor
1 x DJI O3 3-in-1 connection cable
1 x FC adapter cable
1 x sh1.0 4pin silicone cable
1 x Camera connection cable
1 x VTX connection cable
1 x XT90 power cable
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts
12 x Silicone anti-shake pads
לקבלת חדשות מותג ועד 15% הנחה על ההזמנה הראשונה שלך.
Hi ?
How can we help?
Coupon Code
Direct purchase from the factory 
Multi Rotor Parts
RC Parts
