Ana karɓar abubuwan da aka dawo da su cikin kwanaki 40 tun ranar karɓar kayan. Ba za a iya mayar da abubuwan da aka keɓance ba. Abubuwan da aka saya tare da katin kyauta ana iya musayar su kawai.
Kyauta Kyauta
Barka da zuwa Roymall, shafinku na siyan kyaututtuka masu inganci. Muna girmama goyon bayanku, kuma muna ba da kyauta kyauta tare da kowane siyayya.Shirya don bincika tarinmu kuma ku sami kyaututtukanku masu dacewa.
Manufar Jigilar Kaya
Za mu aika kayanku cikin kwanaki 2 bayan siyayya.Lokacin jigilar kaya yawanci kwanaki 5-7 ne.Saboda jigilar mu ta duniya ne, lokacin jigilar zai dogara da wurin ku.
1. Manufar Komawa
Muna karɓar abubuwan da aka saya daga roymall.com kawai.Ba za a iya mayar da kyauta kyauta ba.Dole ne abu ya kasance ba a yi amfani da shi ba kuma a cikin yanayin da kuka karɓa.Za mu sarrafa komawar ku cikin kwanaki 3-5 bayan karɓa.Ba za a iya mayar da abubuwan da aka keɓance ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +447549870296
2.Manufar Maida Kuɗi
Za ku sami cikakken maida kuɗi bayan mu karɓi abubuwan da aka dawo.Kuɗin jigilar kaya ba za a iya mayar da su ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +447549870296
Videos for similar product
Loading product videos...
❮
❯
Products related to this item
Loading related products...
❮
❯
Description:
The module uses genuine quality relay, normally open interfaces
Using SMD optocoupler isolation, driving ability, stable performance
The module can be high or low by a jumper setting trigger
Fault-tolerant design, even if the control line is broken, the relay will not operate
The power indicator (green), the relay status indicator (red)
The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient
Specification:
Maximum load: AC 250V/10A, DC 30V/10A
Trigger current: 5mA
Working voltage: 12V
Module size: 73 x 50 x 18.5mm (L x W x H)
Four mounting bolts holes, diameter 3.1mm
Module Interface:
DC+: positive power supply (VCC)
DC-: negative power supply (GND)
IN: can be high or low level control relay
Relay Outputs:
NO: normally open relay interface
COM: Common Interface Relays
NC: normally closed relay interface
High and low level trigger options:
It is low level trigger when jumper connect to LOW pin
It is high level trigger when jumper connect to HIGH pin
Package included:
1 x 4 Channel H/L Level Trigger Optocoupler Relay Module
It's an "optocoupler" relay module operating at 12 Volt.
Does this mean that 12 V is galvanic isolated from the arduino, that should control the relays? My first impression was: I am missing a separate ground for the relay control and for the arduino!
However, after some study I discovered that you CAN operate the board with galvanic isolated 12 V and the arduino's 5 V.
How? Don't use the straps!!
So don't connect the 4 middle pins with straps to Ground or to VCC of the relay module, but connect these 4 pins to the arduino's ground!
Now the 12V and the arduino's 5V are galvanic isolated! See photo!
Roymall C.o.
Kyauta Kyauta
Manufar Jigilar Kaya
Manufar Komawa
Coupon Code
Direct purchase from the factory 
Electronic Components & Supplies
Module Board
Relay Module
