Eg̃uahẽ porã Roymall-pe, ne renda jopói porã joguápe. Rohechakuaa ha roaguyje ne pytyvõ, ha roñe'ẽ aguyje jopói libre ndive. Ejogua vove, rejoguáta mba'eporã porã ha reñemomba'e jopói libre ndive.Eheka ore apopyrã ha ejuhu ne jopói perfecto.
Mba'e rembosa'irã
Rojapo tembiapo rembosa'irã 2 ára peve.Ára sapy'agua oñemboare 2 ára.Oñemboare 5-7 ára mba'apo (Lunes a Viernes).Oñemboare sapy'a tetã ambuéva rupi.
It is a Lithium battery capacity tester.It is used to test the voltage, discharge capacity and discharge energy of a 18650 lithium battery.
Features:
- Dual working power supply
- 18650 battery special tester
- Support display discharge capacity
- Support display discharge energy
- Support parameter memory function
Specifications:
Work Voltage:DC 5V~12V or 18650 battery
Stand-by current:5~7mA
Discharge current:500mA
Load power: 10W 8ohm
Measuring voltage accuracy:0.1V
Discharge capacity accuracy:1mAh
Discharge energy accuracy:1mWh
Work Temperature:-25℃~85℃
Work Humidity:5%~95%RH
Size:110*80*25mm
Use Steps:
1. Connect work voltage DC 5V~12V from white XH2.54-2P socket or install a 18650 battery at left battery socket.
2. Install a measured 18650 battery at right battery socket.
3. Turn on power supply switch. Then the screen will display current battery voltage.
4. Set discharge stop voltage.Press button + and - to set discharge stop voltage.Parameters can be saved automatically.It is recommended that the 18650 battery stop discharge voltage be set to 3.5V.
5. Short press the first(left) button to start measuring.Then the LED indicator D3 will turn ON.
6. Short press the second button to switch dispaly capacity(mAh), energy(mWh) and voltage.
7. Long press first(left) button to clear dispaly capacity(mAh) and energy(mWh).
8. The battery is tested and shows the battery test value when D3 LED indicator start blinking.
Package Included:
1 x XH-M240 Battery Capacity Tester mAh mWh for 18650 Lithium Battery
Der Kapazitättester ist leicht zu bedienen. Links im Batteriefach kommt die Stromversorgung mit einer 18650 Zelle oder alternativ kann der Tester mit einem 12V Netzteil betrieben werden. Auf den Bildern ist das Ergebnis der rechten 18650 Zelle. 1342 zeigt die mAh an und 4868 die mWh. Die 18650 wurde vorher mit einem anderen Gerät getestet, was auf der Zelle mit 1548 mAh vermerkt ist.
It is interesting capacity Liion 18650 cells tester. One side is for powering ekectronics circuits and the other is for testing capacity. It works fine showing both the capacity in mAh or in mWh. The controll is a bit confuse but I used for it. It is cheap but reliable. I rather move the discharging resistor far awy from the cell because of intensive heat production by the testing. Usable product for DIY makers.
Roymall C.o.
Jopói libre
Mba'e rembosa'irã
Mba'e devolución rehegua
Coupon Code
Direct purchase from the factory 
Electronic Components & Supplies
Module Board
Test & Measuring Module
