[Multipurpose display]Widely used in electric power/communication / railway/construction/oil field/metering/scientific research and teaching/industrial and mining enterprises,etc.

[DC current measurement]When Less than 0.4A, the signal input on the screen will flicker ≥0.5A will not flicker.

[NCV non-contact measurement]When the NCV induction probe of the instrument is close to the circuit under test, different alarm prompts will be issued according to the voltage intensity. [Live Firewire Recognition]Insert the red test lead into the neutral frie wire port,if it is detected as a live wire,the buzzer will sound an alarm,if it is the neutral wire and the ground wire,there is no response.

[AC voltage measurement]In the AC voltage gear, short press the VFD key to enter the variable frequency measurement function.

Contact temperature measurement:Rotate the switch to the temperature gear, plug in the temperature probe to measure, press the SEL button to switch between Celsius and Fahrenheit.

[Inrush current measurement]Measure the maximum current at the moment when the machine is started, Set the gear to AC and DC current gear, short press to enter INRUSH measurement.

[HD Backlight]Work measurement day or night.

[DC current clear to zero]The ZERO clearing function is only used for DC current,and the DC current Affected by magnetic field,long press the ZERO button to reset before measurement.

[42mm large jaw]Large jaw design, suitable for cable measurement within 42mm.

[Data retention]Hold symbol on the screen every 3 seconds after pressing the data hold key It will flash once,press again to cancel.

Function: Auto-ranging clamp meter with multiple functions in one

Color: blue+black

Material: ABS

Detailed analysis and actual measurement of each function

-Capacitance measure

-Resistance measure

-Diode measure

-Continuity test

-Flashlight function

-DC voltage measurement

Only the above package content, other products are not included.

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.