Description:

The Wireless FPV USB RC Flight Simulator Dongle supports for Phoenix, Flysky, for futaba, Radiolink t8 and rc series, Dumbo x6/x6pm, Wfly, Microzone mc6c, mc7, mc8b, mc10, mc6 mini, mc7 mini, frsky and other remote controls. No wiring required, just like an ordinary receiver, which can be used immediately after binding. Closer to the real model aircraft environment, without the constraints of cable plugs. Free! Convenient! High-quality! Twelve protocols in one, switchable at any time. Dual RGB indicators, simple and easy to use,Supports the full series for Phoenix, XTR, Freerider, Aerofly, FMS and other simulators, equivalent to an 18-in-1 dongle. Supports most steam games, such as RDRL, Uncrashed, Tryp FPV, Next, Aerofly RC8 and so on. Does not support realfight g7/7.5, but supports steam genuine rf9.5 or above.Supports for macos, Windows and android, driver-free.

Binding:

1. Plug the dongle into the USB port of the computer.

2. After waiting for 20 seconds, the dongle enters the binding mode, and the Morse code flashes slowly. The color and code of each protocol are shown in the table (press the button during this period to switch to a protocol).

3. Turn on the remote control to enter the binding mode.

4. Wait for 30 seconds (some protocols may take several minutes), the dongle flashes quickly and stays on (some protocols require restarting the remote control after flashing), and the code matching is completed.5. Open the emulator corresponding to the working mode on the computer and you can play.

The above steps are also applicable to changing remote controllers. MC6C mini and MC7, MC7mini, and MC10 need to use the old protocol to connect to this product. After the binding is completed, turn on the control and receive the second connection, and the indicator light is always on.

Switch working mode:Turn off the remote control

1. After the binding is successfully matched,2. Unplug the dongle and re-insert it into the USB port of the computer.

3. Press and hold the button of the dongle within 20 seconds. Observe how many times the indicator light flashes every three seconds. How many times it flashes is the mode. See what you want. After releasing the button, the dongle will flash to save the settings and restart, and the mode switch is successful.4. Re-plug the dongle.