ESC: MCU: 32-bit F4 120MHz main frequency, maximum support 128KHz PWM Packet Rate Continuous / peak current: 100Ax4/120Ax4 (continuous 100A requires water cooling environment) Input voltage: 3-6S Lipo Support throttle signal: Dshot150/300/600/1200 MultiShot Oneshot42 Oneshot125 Current sensor: support (current meter scale: 125) Firmware name: DARWIN_F4_60 Power cord: 14AWG-120mm long (the ESC terminal and electrolytic capacitor have been welded at the factory) Power plug: XT60 Dimensions: 36.8mm x 42.5mm x 7.5mm Mounting hole: 30.5mm x 30.5mm Weight: 23.0g± 0.2g (excluding capacitors and power cords) Apply for: 5-10 inch FPV Drones
Packing List:
FC: 1 x DarwinFPV "Cement" Ultra Durable F7 Waterproof Flight Controller 1 x 30mm ESC cable (8P) 1 x 65mm analog VTX cable (4P) 1 x 65mm GPS cable (6P) 1 x 65mm receiver cable (4P) 1 x 65mm HD VTX cable (6P) 4 x M3*4.5mm shock-absorbing balls (installed on FC) 1 x sticker
ESC: 1 x DarwinFPV "Cement" Ultra Durable 100A Waterproof ESC 1 x 30mm ESC cable (8P) 1 x XT60 1 x 14AWMG power cable with a length of 120mm (soldered to the ESC) 1 x 35V/1000uF electrolytic capacitor (soldered to the ESC) 4 x M3*6.6mm shock-absorbing balls (installed on the ESC) 1 x sticker
Stack: 1 x DarwinFPV "Cement" Ultra Durable F7-100A Waterproof Stack 1 x 30mm ESC cable (8P) 1 x 65mm analog VTX cable (4P) 1 x 65mm GPS cable (6P) 1 x 65mm receiver cable (4P) 1 x 65mm HD VTX cable (6P) 1 x XT60 1 x 14AWMG power cable (length 120mm, soldered to the ESC) 1 x 35V/1000uF electrolytic capacitor (soldered to the ESC) 4 x M3*4.5mm shock-absorbing balls (installed on FC) 4 x M3*6.6mm shock-absorbing balls (installed on the ESC) 4 x M3*25 hexagon socket head black 304 screws (installed on the stack) 4 x M3 nylon nuts 1 x sticker
prodotto buono e robusto se non si vuole avere pensieri che si rompa o bruci qualcosa questo stack Fc + esc è perfetto.
Unica pecca l’esc a 32bit e tramite programma non si può modificare i parametri.