Kostenloser Standardversand bei Bestellungen über $9.9
Rückgaberecht
Rückgaben werden innerhalb von 40 Tagen nach Erhalt der Ware akzeptiert. Personalisierte Artikel können nicht zurückgegeben oder umgetauscht werden. Artikel, die mit einer E-Geschenkkarte gekauft wurden, können nur umgetauscht werden; Rückerstattungen sind nicht möglich.
Kostenloses Geschenk
Willkommen bei Roymall, deiner professionellen Website für den Kauf von Premium-Warenhausgeschenken. Wir schätzen und schätzen deine Unterstützung sehr und möchten unsere Dankbarkeit zeigen, indem wir deinen Einkäufen eine zusätzliche Portion Aufregung verleihen. Wenn du bei uns einkaufst, genießt du nicht nur hochwertige Produkte, die deinen Lebensstil verbessern, sondern erhältst auch ein exklusives kostenloses Geschenk zu jeder Bestellung. Bereit, unsere Kollektion zu erkunden und deine perfekten Geschenke zu finden? Durchstöbere unsere Auswahl an Premium-Warenhausartikeln, gib deine Bestellung auf und freue dich auf das kostenlose Geschenk, das zusammen mit deinem Einkauf ankommt.
Versandrichtlinie
Wir werden uns bemühen, die Artikel nach Erhalt deiner Bestellung sicher zu dir zu liefern. Die Lieferdetails werden in deiner Bestätigungs-E-Mail angegeben.In den meisten Fällen werden Bestellungen innerhalb von 2 Tagen bearbeitet. Unter besonderen Umständen kann es zu Verzögerungen kommen: Wenn du deine Bestellung am Samstag, Sonntag oder an Feiertagen aufgibst, wird sie um 2 Tage verzögert.Normalerweise dauert es 5-7 Werktage (Montag bis Freitag), ohne dass Flugverzögerungen oder andere Umweltfaktoren dies beeinflussen.Da unser Versandservice weltweit ist, hängen die Lieferzeiten von deinem Standort ab. In abgelegenen Gebieten oder Ländern kann es einige Tage dauern, also bitte habe Geduld.
1. Rückgabe- und Umtauschrichtlinie
Wir akzeptieren nur Artikel, die auf roymall.com gekauft wurden. Wenn du bei unseren lokalen Händlern oder anderen Einzelhändlern kaufst, kannst du sie nicht bei uns zurückgeben.Artikel im Schlussverkauf oder kostenlose Geschenke können nicht zurückgegeben werden.Um für eine Rückgabe berechtigt zu sein, muss dein Artikel unbenutzt und in dem Zustand sein, in dem du ihn erhalten hast. Er muss sich auch in der Originalverpackung befinden.Nachdem du die Rückgabeanweisungen von uns erhalten hast, verpacke bitte deine zurückgegebenen Artikel und gib dein Paket bei der örtlichen Post oder einem anderen Kurierdienst ab. Wir bearbeiten deine Rückgabe oder den Umtausch des Artikels innerhalb von 3-5 Werktagen nach Erhalt. Die Rückerstattung wird automatisch auf deine ursprüngliche Zahlungsmethode gutgeschrieben.Keine Rückgaben oder Umtausche sind möglich, wenn das Produkt individuell angefertigt wurde, einschließlich individueller Größe, Farbe oder Druck.Benötigst du weitere Hilfe? Kontaktiere uns. service@roymall.com oder Whatsapp: +447549870296
2. Rückerstattungsrichtlinie
Du erhältst eine vollständige Rückerstattung oder 100% Gutschrift, nachdem wir das zurückgesendete Paket erhalten und überprüft haben. Die Rückerstattung wird automatisch auf deine ursprüngliche Zahlungsmethode gutgeschrieben.Bitte beachte, dass Versandkosten sowie Zölle oder Gebühren nicht erstattungsfähig sind. Die zusätzlichen Versandkosten sind nicht erstattungsfähig, sobald das Paket versandt wurde. Du bist für die Zahlung dieser Gebühren verantwortlich, und wir können sie nicht erlassen oder erstatten, auch wenn die Bestellung an uns zurückgesendet wird.Sobald wir deinen zurückgegebenen Artikel erhalten und bestätigt haben, senden wir dir eine E-Mail, um dich zu benachrichtigen, dass wir deinen zurückgegebenen Artikel erhalten haben. Wir werden dich auch über die Genehmigung oder Ablehnung deiner Rückerstattung informieren.Wenn du Probleme mit dem Rückerstattungsprozess hast, kontaktiere uns. service@roymall.com oder Whatsapp: +447549870296
Videos for similar product
Loading product videos...
❮
❯
Products related to this item
Loading related products...
❮
❯
iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol ARM TX Module With Case
Description: The 4 in 1 wireless module integrate four RF chips (CC2500,NRF24L01,A7105,CYRF6936) into one single circuit board,with MCU baseplate,can support a variety of remote control protocols by identifying the PPM signal output of the remote control,such as Walkera DEVO,Spektrum DSM2,Flysky,Frsky,WLToys,Hubsan,Hisky,etc. It can control up to several hundreds airplanes (or receivers).
This module can recognize the remote control PPM signal, then converted into the corresponding standard wireless remote control format,which means that in theory as long as the remote control is with analog functions, it can work.
This Multiprotocol TX Module is the ARM board, all protocols are included. It is suitable for many brand"s quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert the TX Module to your Frsky X9D/X9D Plus/X12S,flysky TH9X,Turnigy 9XR/9XR PRO transmitter. As long as your transmitter can use the Open TX firmware,it is compatible with this module. You will get many new ways to control the RC models.
Specification:
Brand Name: iRangeX Item Name: IRX4 Band: 2.4G Weight: About 40g Firmware: ARM Dimension: About 49x22x65mm Antenna Length: About 108mm
Compatible Transmitter: Frsky: All the frsky transmitter Futabas: Futabas S-FHSS transmitter Flysky: TH9X (Note: The plastic base of the pins on the transmitter needs to be removed to fit this module.) Turnigy: 9XR,9XR Pro Others: Other transmitter that can use the Open TX firmware.
Compatible RC Aircrafts: Supported Brand :Cheerson,Syma,Wltoys , Eachine E010(Most of these brand"s quadcopters, helicopters and airplanes are compatible but not every model.).
Features: - Upgraded ARM board,all protocols are included. - For OrangeTX, all CYRF6936 based protocols are included. - Suitable for many brand"s quadcopters,helicopters and airplanes . - Multiprotocol TX module,as long as your transmitter can use the Open TX firmware,then it is compatible with module. - Multiprotocol hexs/bin files attached have been compiled with the source files dated of 19/12/2016 using the default settings AETR, telemetry enabled, serial mode enabled and ppm mode enabled using default table. INV versions have inverted telemetry set which is a must for OpenTX while the others are compatible with er9x/ersky9x. - For Atmega328 boards, some RF modules (and associated protocols) have been included in each hexs to fit in the Atmega328. For example Multiprotocol_V1.1.5_A7105-CC2500-CYRF6936.hexs means that protocols depending on NRF24L01 protocols are excluded.
Pin Function:
Number
Name
Property
Description
1
VCC
Power
3.3V Power supply
2
GND
Power
ground
3
PE1
input
Amplifier and antenna switching signal. See the truth table
4
PE2
input
Amplifier and antenna switching signal. See the truth table
5
CSN1
input
A7105 chip select signal
6
CSN2
input
CC2500 chip select signal
7
CSN3
input
NRF24L01 chip select signal
8
CSN4
input
CYRF6936 chip select signal
9
SCK
input
SPI clock signal
10
MOSIs
input
SPI input for slave device
11
MISO
output
SPI output for slave device
12
CYRF_RST
input
CYRF6936 Reset
16
RFO
in/out
RF signal input/output, connect to antenna
others
GND
Power
ground
Truth Table:
status
PE1
PE2
A7105 RF signal to antenna
0
0
CC2500 RF signal to antenna
0
1
NRF24L01 RF signal to antenna
1
0
CYRF6936 RF signal to antenna
1
1
Supported Protocols: - Flysky (Generation I protocol,based on A7105,tested) - Hubsan (Based on A7105,tested) - Frsky (Based on CC2500,tested) - Hisky (Based on24L01,tested) - V2x2 (Based on 24L01) - Dsm2 (Based on CYRF6936,tested) - Devo (Based on CYRF6936,tested) - YD717 (Based on 24L01 ) - KN (V977,Based on 24L01,tested) - SymaX (Based on 24L01) - SLT (Based on 24L01) - CX10 (Based on 24L01) - CG-023 - BAYANG - SIMAX5C
Note: The above protocols are transplanted from open source projects based on the remote control Walkera DEVIATION,the the original author have tested almost the protocols,but he is not specially test for this 4 in 1 wireless module,the protocols our supplier tested have been stated above,untested protocols does not rule out is not supported,but there may be a problem of program configuration,so not rule out the subsequent firmware can support.
Open source protocol is mostly cracked,protocol version is constantly updated,inevitably there are omissions. Including but not limited to the following issues: - Part program version DSM2 have protocol compatibility problems. - Some receiver (original AR600) need to rebind per use,some receiver (Spektrum integrated receiver) frame rate is a bit slow. This issue basically determine the problem is on the program itself.
Tested Ground Control Distance: CC2500: V8FR receiver with Frsky protocol,about 240m. A7105: WLToys V911 helicopter with Flysky 8 ch receiver,based on Flysky protocol,about 240m. CYFR6936: Spektrum MCPX helicopter with DSM2 protocol,Walkera SUPERCP helicopter with DEVO protocol,about 200m, NRF24L01: WLToys V977 helicopter with KN protocol,use Walkera DEVO transmitter,about 200m (If equipped with MCU baseplate,only 50m). Hisky HCP100S helicopter with Hisky protocol,about 70m.
Having bought a Taranis transmitter for its sheer versatility, I had to have one of these to go with it. Like the transmiter, it comes without any instructions and there is no link to an on-line manual. Fortunately, there are how-to videos on Youtube, but they only scratch the surface. The first hurdle is to get around the complexity of setting up the transmitter to use the module. You immediately find that the transmitter will not even recognise the module until you download and install the latest firmware for the transmitter. You then have to negotiate the various menus to turn off the internal RF module and initiate the external module. You can then select the appropriate model type. Maybe I'm missing something, but not all of the listed model protocols are supported, although the menu structure is so complex that it easy to miss something. I also found that not all of the listed types will actually work. Here is a summary of my experiences:
HISKY - It would bind but only gave erratic and intermitent control. I tried this with three different receivers with the same result.
DSM2 - If you select 'DSM2' from the menu, it won't work. You have to select 'MULTI' and then scroll through to 'DSM'. You can then select from 'S 11ms', 'S 22ms', 'X 11ms' and 'X 22ms'. 'S 22ms' works with all my models, 'DSM2' and 'DSMX'. (Control order: TAER).
Eachine QX80/QX95 - no problem. (Control order: TAER).
JXD392 quadcopter - It would bind, but the control order was jumbled and no amount of variations in the transmitter order made any difference. It seems there was a bug in the firmware I dowmloaded. When a later version became available, the setup wizard now worked and I was able to correct this. (Control order: AETR).
Nine Eagles P51 - no problem. (Control order: TAER - aileron reversed).
Hubsan X4 and Q4 - no problem. (Control order: AETR - aileron and rudder recersed).
Eachine H8S 3D - no problem. (Control order: AETR).
With all the quadcopters it is necessary to use an oscilloscope to establish the use of the other features. Most of these use pushbuttons and the Taranis doesn't have any, so you have to find tour own workaround for this.
Both this module and the Taranis transmitter are not exactly user-friendly. Both need detailed instructions. The transmitter 'Manual' makes no mention of programming. I still don't know what the two lights on the module are for.
In short, it will work with most things, except HiSky, but you may need a lot of experimentation and trial and error to get a particulr model to work.
Its worth noting that all of the above will bind and work perfectly with my modified Devo 7e.
Модуль позволяет сделать передатчик Таранис или любой другой с прошивкой OpenTX 2.2 по настоящему универсальным. Прошивка модуля сделана на основе Deviation. Модуль поддерживает большинсво современных моделей. Выбор протокола управления осуществляется прямо из меню передатчика. Есть даже поддержка протокола FrSky с телеметрией! И да, этот модуль мощнее, чем встроенный в передатчик в Таранисе:)