Back

Happymodel Mobula8 1-2S 85mm 微型 FPV 競速 Mobula 8 2 吋微型遙控無人機 Whoop 適用於後院自由式

Happymodel Mobula8 1-2S 85mm 微型 FPV 競速 Mobula 8 2 吋微型遙控無人機 Whoop 適用於後院自由式

Roymall C.o.

$106.99 /$182.99

4.22466

Shipping to: United States

Express: 7-12 business days

Standard: 15-25 business days

location

加入購物車立即購買

$149.99 /$182.99

Coupon Code

Direct purchase from the factory

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

Credit or Debit Card

保證安全結帳

免費禮物

任何購買均可獲得免費禮物

運送政策

訂單超過$9.9免標準運費

退貨政策

退貨將在收到商品後40天內接受。客製化商品不可退貨或換貨。使用電子禮品卡購買的商品僅可換貨；不適用退款。

免費禮物

歡迎來到Roymall，您的專業購買高級百貨禮物的網站。我們非常重視並感謝您的支持，並希望通過為您的購買增添額外的驚喜來表達我們的感激之情。當您與我們一起購物時，您不僅可以享受提升生活品質的高品質產品，還可以在每次訂單中獲得獨家免費禮物。準備好探索我們的收藏並找到您的完美禮物了嗎？瀏覽我們的高級百貨商品選擇，下訂單，並期待您的免費禮物與您的購買一起到來。

運送政策

我們將努力在收到您的訂單後將商品安全送達您手中。運送詳情將在您的確認郵件中提供。在大多數情況下，訂單將在2天內處理。在特殊情況下，可能會延遲如下：當您在週六、週日或公共假期下訂單時，將延遲2天。通常需要5-7個工作日（週一至週五），不受航班延誤或其他環境因素影響。由於我們的運送服務是全球性的，運送時間將取決於您的位置，因此可能需要幾天時間，如果您位於偏遠地區或國家，請耐心等待。

1. 退貨與換貨政策

我們僅接受在roymall.com購買的商品。如果您從我們的本地分銷商或其他零售商處購買，則無法在我們這裡退貨。最終銷售商品或免費禮物不可退貨。要符合退貨條件，您的商品必須未使用且與收到時的狀態相同。還必須保留原始包裝。收到我們的退貨指示後，請將退貨商品打包並將包裹送至當地郵局或其他快遞服務。
我們將在收到退貨商品後3-5個工作日內處理您的退貨或換貨。退款將自動處理並記入您的原始付款方式。如果商品是根據訂製生產的，包括訂製尺寸、訂製顏色或訂製印刷，則不可退貨或換貨。需要更多幫助，請聯繫我們。 service@roymall.com 或 Whatsapp: +447549870296

2.退款政策

在我們收到並確認退貨包裹後，您將獲得全額退款或100%商店信用。退款將自動處理並記入您的原始付款方式。請注意，運費及任何關稅或費用不可退款。包裹發貨後，額外運費不可退款。您需負責支付這些費用，我們無法免除或退款，即使訂單被退回給我們。一旦我們收到並確認您的退貨商品，我們將向您發送電子郵件，通知您我們已收到您的退貨商品。我們還將通知您退款的批准或拒絕。如果您在退款過程中有任何問題，請聯繫我們。 service@roymall.com 或 Whatsapp: +447549870296

Videos for similar product

Loading product videos...

❮

❯

Products related to this item

Loading related products...

❮

❯

Notice:

Add new UART ELRS 2.4G Receiver Version.

It comes with a new X12 ELRS Pro v1.1 flight controller, onboard vtx and onboard uart elrs receiver are controlled by ESP32 chip , now you have a free set of UART and you can flash single ExpressLRS firmware for the Mobula8 ELRS .

Flight Controller	X12 ELRS Pro v1.1 AIO 5-IN-1 Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4 Sensor: ICM42688P(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw (MSP control) Built-in UART ExpressLRS v3.0.0 Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 470
Onboard 4in1 ESC	Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Firmware target: Z_H_30 Default protocol: DSHOT300 Bluejay firmware ready
Onboard uart ExpressLRS 2.4GHz Receiver	Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: Serial_based CRSF Compatible with ExpressLRS V3.x.x TX Module Could flash single ELRS receiver firmware by Wifi ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx
Onboard 5.8g OPENVTX	Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw)

Features:

X12 ELRS Pro v1.1 5-IN-1 AIO flight controller built-in 2.4G ELRS V3.0 and OPENVTX
VTX Power up to 400mw
ELRS V3.0 (Default), could flash elrs firmware for the receiver by wifi
EX1103 KV110000 motors
CaddxFPV Ant FPV camera
Smooth and powerful
Compatible for 1S-2S Lipo/LIHV battery

Recommend 2S 450mah/550mah/650mah battery (Not include)

Specifications: ( Manual for UART ELRS / ELRS / Frsky / PNP or TBS version )Brand Name: HappymodelItem Name: Mobula8 1-2S 85mm Micro FPV whoop droneWheelbase: 85mmSize: 120mm*120mm*50mmWeight: 43gReceiver option:2.4G ELRS SPI(Support ELRS v2.0, provide firmware could compatible with elrs v3.0)SPI Frsky D8/D16 not compatible with EMAX E6 radioSPI Flysky AFHDS2A PNP (without onboard receiver)TBS version(with external TBS CRSF NANO RX)

EX1103 KV11000 brushless motor	Mode: EX1103 KV11000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.Len): Φ13.5mm15.5mm Weight(g):3.8g No.of Cells(Lipo):1-2S
Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw)	Weight:0.88g Material: PC Pitch:2.3inch Props Dia:52.17mm Center Thickness:5mm Center Hole Dia:1.5mm
X12 5-IN-1 AIO flight controller	X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM20689 or ICM42688P(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A Built-in voltage detection Built-in current sensor
Onboard 4in1 ESC	Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Firmware target: Z_H_30 Default protocol: DSHOT300 Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver	Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn't flash separately ExpressLRS firmware Could flash FC firmware to support ExpressLRS v3.0 TX module
Onboard SPI Frsky D8/D16 receiver Versio	SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8/D16 modelChannels: 8ch/16ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support
Onboard SPI Flysky receiver Version	SPI BUS receiver Protocol: AFHDS-2A Channels: 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support
PNP Version (without onboard receiver)	Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS input
External TBS CRSF Nano receiver version	Original TBS Receiver ,CRSF Protocol , Official TBS transmitter compatible
Onboard 5.8g OPENVTX	Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw)
Caddx ANT 1200tvl camera	Image Sensor: 1/3u2033 CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES WDR: Global WDR DNR: 3D DNR Dimensions: 1414mm(with bracket to 1919mm) Wide Power Input: DC 3.7-18V Weight: 2g (N.W.)

Package Included:

1* Happymodel Mobula8 RC Drone

Reviews(244)

4.80

Robas1

5.0

Absolutnie świetny dron! Dużo lepszy niż mój poprzedni Mobula 7 2S, którego mocno przerobiłem, m. in. montują kamerę 1200TVL zamiast oryginalnych 700 aTVL. Mobula 8 jest BARDZO CICHA i lata bardzo płynnie. Nie spodziewałam się, że będzie aż tak duży postęp w stosunku do Mobula 7 2s. Jestem bardzo zadowolony i polecam tego drona. Ja mam wersję FlySky receiver. Zrobiłem sobie przejściówkę z baterii 1S JST 2.0 na TX30
Nivaldo

5.0

Excelente produto, qualidade e bom preço..!!