Sɔnni segin bɛ se ka sɔrɔ 40 don kɔnɔ Sɔnni yɛlɛman tɛ segin Sɔnniw minnu bɛ sɔn ni kaati hɔrɔn, olu tɛ segin
Sɔnni Hɔrɔn
I ni ce Roymall, i ka sɔnniw siti. An bɛ i ka dɛmɛ fɛɛrɛ. O sɔnni hɔrɔn bɛ kɛ i ka sɔnni kɛnɛ kan.
Ka Taa Cogo
An bɛ sɔnniw taa i ka so la 2 don kɔnɔ. Kɛnɛ cɛsiri bɛ se ka kɛ 5-7 don kɔnɔ.
1. Ka Segin Cogo
Sɔnniw bɛ segin 40 don kɔnɔ. Sɔnni yɛlɛman tɛ segin.
2.Ka Sɛn Segin
I bɛ sɛn sɔrɔ segin kɔnɔ.
Videos for similar product
Loading product videos...
❮
❯
Products related to this item
Loading related products...
❮
❯
*Description:
KP184 series electronic load can be widely applied to product testing and ageing in LED lighting, power source, charger and accumulator. The current mode can be sued for simulating resistive load to discharge the battery and load the power source; the voltage mode can be used for simulating capacitive load and load the charge, as well as simulating the constant voltage of LED and load the power source. It is used simply, adjusted conveniently and has perfect protection function. The performance and function are unmatched by traditional slide wire resistor. If it is used for related industries, it could enhance productivity and reduce the cost.
11.Overcurrent protection point/protection time testing function
12.Fan PWM temperature control;
13.Power source 110VAC/220VAC shift use
14.RS485 and 232 communication interface
15.Synchronous operation function of multiple loaded devices online
16.Upper computer software support with powerful function and friendly interface
Specification:
Power consumption: < 20 W
Load voltage: DC 1 -150 V
Load current: 0-40A
Load power: 0-400W
Measuring precision Current: ±0.05%+5mA
Measuring Precision Voltage: ±0.05%+5mV
Control precision Current: ±0.05%+5mA
Control precision Voltage: ±0.05%+5mV
Communication Mode:RS232/RS485
Overvoltage: When the voltage is more than 152V,the load is turned off load
Over temperature: 85℃
Overpower: Single channel: 410W
Power supply input fuse: 0.5
Size: 300*90*180mm/11.8*3.5*7.1in
Weight: Approx.4000g/141.1oz
Package Includes:
1 x KP184 DC Electronic Load
1 x Plug(EU)
1 x Remote compensation terminal
2 x Positive and negative test terminal
2 x Test cable
1 x user manual
Note:
We will send you a plug adapter according to your country.
Note:
This DC Load support secondary software programming, we hope you will have the software yourself ;
If you do not have, we can send it to you as a free gift, Software is only a gift ,not the goods ,so we hope you are professional for software using ; it is a free and development Software; it is only for Win7 or IE system
Excellent!
Quality is very good, although not perfect. One small design issue means if the device gets slightly bent, one of the pass transistors can be shorted to earth. This can be protected against with a piece of kapton tape added. Other than that, the UI is good and I think the device will be reliable.
I do like the display compared to an OLED which won't last, or an LCD with poor viewing angles or lower lifespan. The LED display is very clear and the instructions are good, including the serial remote control protocol.
The fan is controlled properly, which is fantastic. It turns off when not needed, and ramps up slowly depending on load.
Included are some terminals, heavy duty cable, and a BNC connector for making the remote sense cable. The BNC connector is of poor quality - I recommend using another. The cable and terminals are good. I recommend buying some good banana jacks too.
Amazing product for this price. Delivery by Banggood was perfect.
Many softwares are available in the DIY community. Check out the software by Interflexo at the EEVblog forums. It’s great.
Roymall C.o.
Sɔnni hɔrɔn
Ka taa cogo
Ka segin cogo
Coupon Code
Direct purchase from the factory 
Tools
Measurement & Analysis Instruments
Battery Testers
