Back

ZHIYU® DC 12V 2 Way 3 Wire Fan Smart Temperature Controller With Temperature Speed Digital Display Stop-Rotating Alarm Function

ZHIYU® DC 12V 2 Way 3 Wire Fan Smart Temperature Controller With Temperature Speed Digital Display Stop-Rotating Alarm Function

Roymall C.o.

$16.99 /$25.61

4.91003

Shipping to: United States

Express: 7-12 business days

Standard: 15-25 business days

location

কাৰ্টত যোগ কৰক এতিয়া কিনক

$20.99 /$25.61

Coupon Code

Direct purchase from the factory

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

Credit or Debit Card

নিশ্চিত সুৰক্ষিত চেকআউট

মুক্ত উপহাৰ

যিকোনো ক্ৰয়ৰ সৈতে মুক্ত উপহাৰ

প্ৰেৰণ নীতি

$9.9 ৰ ওপৰৰ অৰ্ডাৰত মুক্ত প্ৰেৰণ

ফিৰতী নীতি

বস্তু গ্ৰহণৰ তাৰিখৰ পৰা ৪০ দিনৰ ভিতৰত ফিৰত দিব পাৰি কাষ্টমাইজ বস্তু ফিৰত দিব নোৱাৰি ই-উপহাৰ কাৰ্ডৰ সৈতে কিনা বস্তু কেৱল সলনি কৰিব পাৰি; ৰিফাণ্ড প্ৰযোজ্য নহয়

মুক্ত উপহাৰ

Roymall-লৈ স্বাগতম, প্ৰিমিয়াম ডিপাৰ্টমেণ্ট ষ্টোৰ উপহাৰ ক্ৰয় কৰাৰ বাবে আপোনাৰ পেছাদাৰী ৱেবছাইট। আমি আপোনাৰ সমৰ্থনক উচ্চ মূল্য দিওঁ আৰু প্ৰতিটো অৰ্ডাৰৰ সৈতে এক বিশেষ মুক্ত উপহাৰ আগবঢ়াই কৃতজ্ঞতা প্ৰকাশ কৰোঁ।

প্ৰেৰণ নীতি

অৰ্ডাৰ গ্ৰহণৰ পিছত ২-৫ কৰ্মদিনত প্ৰেৰণ কৰা হয়। $৯.৯ ৰ ওপৰৰ অৰ্ডাৰত মুক্ত প্ৰেৰণ সেৱা।

১. ফিৰতী আৰু সলনি নীতি

বস্তু গ্ৰহণৰ পৰা ৪০ দিনৰ ভিতৰত ফিৰত দিব পাৰি। কাষ্টমাইজ বস্তু ফিৰত দিব নোৱাৰি।

২. ৰিফাণ্ড নীতি

ফিৰত দিয়া বস্তু পৰীক্ষা কৰাৰ পিছত সম্পূৰ্ণ ৰিফাণ্ড দিয়া হয়।

Videos for similar product

Loading product videos...

❮

❯

Products related to this item

Loading related products...

❮

❯

Specifications:

Power supply: DC 12V; the maximum range 11-14V; too low voltage displaying Lu; too high voltage displaying Hu; protection closed output

Output current: single channel maximum continuous output current 1.2A; double channels being both used at the same time current cannot exceed 2.0A; not suggesting using the fan with current being lower than 0.15A

Work efficiency: 90% (input 12V; output double way 8V 0.8A)

Reversely connected protection: short circuit reverse connection protection; power supply being connected reversely will burn out input copper foil
Over current protection: no over current protection; please note insulating installation; power up it after the wire is well connected to avoid output short circuit!! (only paid maintenance will be offered for overload and short circuit damage)

Thermal resistance parameters: NTC 10K B=3950

Measurement temperature error: 1%-0.5℃; after combining 1% probe, the maximum error 2%-1℃

Board dimensions: 92mm*54mm (width*height); location hole place: 87mm*47mm diameter 3.4mm

It automatically take turns to display channel 1 temperature, rotation speed, and channel 2 temperature, rotation speed under normal operation; quickly switch the display by pressing the "+" "-" button.

Parameter Setting:

Manual rotating speed setting (the minimum rotating speed under temperature control):
Press “OK” button to enter into rotating speed setting function; FAN1 2 indicator lights lighting up at the same time stands for current adjustment being fan 1’s output size and by pressing the “+”&“-” button to adjust it with minimum 1 & maximum 100. After the setting, press “OK” button to enter into fan 2’s output size setting; after the setting, press “OK” button again to exit and save the parameters.

Temperature control and stop-rotating alarm settings:

Under normal operating state, long-press “OK” button to enter into temperature control and stop-rotating alarm settings; indicator light on the right indicates corresponding setting channel; corresponding setting parameter display, meanings, and range (“**” stands for digit ):
L** accelerating speed temperature setting, range 5-94℃; lower than H** at least 5℃, or adjust up H** by linkage.
H** full speed temperature setting; range 10-99℃; higher than L** at least 5℃, or adjust down L** by linkage.
F** fan being shut off temperature; minimum 1; maximum limitation is lower than L** 2℃; when F00 is set, fan is not shut off.
bON / bOF: channel stop-rotating alarm on / off.

Adjust the setting value by pressing “+”&“-” button; press “OK” button to switch setting parameters; set the channel 1 according to the above sequence first, channel 2 second; press “OK” button at last to exit and save parameters.

Supplementary Instructions: when channel temperature reaches L** after fan being shut off function is started, fan is started at minimum speed; it will accelerate with temperature increasing; when channel temperature is lower than F**, fan is shut off. Corresponding channel stop-rotating alarm will automatically block shut-off status’s rotating speed check.

Shutting off channel 2 display:

One channel is needed for some application and now channel 2 can be shut off; the setting method: keep pressing “OK” button to make it be powered up with controller not being powered up; controller entering into channel 2 displays setting status; modify the setting by pressing “+”&“-” button; 2ON / 2OF stands for channel 2 display / no display; after the setting, press “OK” button to save it, exit and enter into operating status.

Note: after channel 2 display being shut off, it will not display channel 2’s rotating speed and temperature only on LED display; it will not affect channel 2’s function.

Package included:

1 x Fan temperature controller
2 x Temperature probe
1 x Buzzer

Reviews(26)

5.00

Daniel Mišáni

5.0

Rychlé doručení a vše odpovídá popisu
BG415354434

5.0

This is honestly absolutely brilliant! the only downside is that it doesnt come with a manual but to be fair i copy and pasted it off of this website and saved it on my phone for future reference. they supplied a couple extra sensors and buzzers in case you break 1 or have a differwnt preference on which type of sensor youd like to use. all round great device.