Back Share

جهاز تحليل هوائي AAI الأصلي (النسخة الإنجليزية) N1201SA N1201SA+، 34.375 ميجاهرتز - 2.7 جيجاهرتز، مع مقاومة متجه الأشعة فوق البنفسجية RF، ومضاد موجة ثابتة ANT، وجهاز اختبار

  • gift Roymall C.o.
  • amazon
  • $93.99 /$134.19
    5.01233
    Shipping to: United States
    Express: 7-12 business days
    Standard: 15-25 business days
    $109.99 /$134.19
    • *Name:

    • *Email:

    • *Phone:

    • *Quantity:

    • *Content:

    • Attachment:

      Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

    دفع آمن مضمون

    هدية مجانية
    هدية مجانية مع كل عملية شراء
    سياسة الشحن
    شحن قياسي مجاني للطلبات فوق 9.9 دولار
    سياسة الإرجاع
    سيتم قبول العناصر المرتجعة في غضون 40 يومًا من تاريخ استلام البضائع. لا يمكن إرجاع أو استبدال العناصر المخصصة. العناصر المشتراة ببطاقة هدية إلكترونية قابلة للاستبدال فقط؛ لا تنطبق عمليات الاسترداد.

    هدية مجانية

    مرحبًا بكم في Roymall، موقعكم الاحترافي لشراء هدايا المتاجر الكبرى الفاخرة. نحن نقدر ونقدر دعمكم كثيرًا ونريد أن نعبر عن امتناننا بإضافة لمسة إضافية من الإثارة إلى مشترياتكم. عندما تتسوق معنا، لن تستمتع فقط بمنتجات عالية الجودة تعزز نمط حياتك، ولكنك ستتلقى أيضًا هدية مجانية حصرية مع كل طلب تقدمه. هل أنت مستعد لاستكشاف مجموعتنا والعثور على هداياك المثالية؟ تصفح اختيارنا من عناصر المتاجر الكبرى الفاخرة، قدم طلبك، وتطلع إلى وصول هديتك المجانية مع مشترياتك.

    سياسة الشحن

    سنعمل بجد لتسليم العناصر إليك بعد استلام طلباتك والتأكد من وصولها بأمان. سيتم توفير تفاصيل التسليم في بريد التأكيد الخاص بك.في معظم الحالات، يتم معالجة الطلبات في غضون يومين. في ظروف خاصة، قد يتم تأخيرها على النحو التالي: عند تقديم طلبك يوم السبت أو الأحد أو في أيام العطل الرسمية، سيتم تأخيره لمدة يومين.عادة، يستغرق الأمر من 5 إلى 7 أيام عمل (من الاثنين إلى الجمعة) دون تأثر بتأخر الرحلات الجوية أو العوامل البيئية الأخرى.نظرًا لأن خدمة الشحن لدينا عالمية، فإن أوقات التسليم تعتمد على موقعك، لذلك قد يستغرق الأمر بضعة أيام، ونرجو منك الصبر إذا كنت في مناطق أو دول نائية.

    1. سياسة الإرجاع والاستبدال

    نحن نقبل فقط العناصر المشتراة من roymall.com. إذا اشتريت من موزعينا المحليين أو تجار التجزئة الآخرين، فلا يمكنك إرجاعها إلينا. العناصر النهائية أو الهدايا المجانية غير قابلة للإرجاع.لكي تكون مؤهلاً للإرجاع، يجب أن يكون العنصر غير مستخدم وفي نفس الحالة التي استلمته بها. يجب أيضًا أن يكون في العبوة الأصلية.بعد استلام تعليمات الإرجاع منا، يرجى تغليف العناصر المرتجعة وإيداع الطرد في مكتب البريد المحلي أو خدمة توصيل أخرى.
    سنقوم بمعالجة إرجاعك أو استبدال العنصر في غضون 3-5 أيام عمل بعد استلامه. سيتم معالجة المبلغ المسترد وإضافته تلقائيًا إلى طريقة الدفع الأصلية الخاصة بك.لا يمكن قبول الإرجاع أو الاستبدال إذا تم إنتاج المنتج حسب الطلب، بما في ذلك الحجم المخصص أو اللون المخصص أو الطباعة المخصصة.إذا كنت بحاجة إلى مزيد من المساعدة، يرجى الاتصال بنا. service@roymall.com أو Whatsapp: +447549870296

    2. سياسة الاسترداد

    ستحصل على استرداد كامل أو رصيد متجر بنسبة 100% بعد استلامنا للطرد المرتجع والتحقق منه. سيتم معالجة المبلغ المسترد وإضافته تلقائيًا إلى طريقة الدفع الأصلية الخاصة بك. يرجى ملاحظة أن تكاليف الشحن وأي رسوم أو ضرائب غير قابلة للاسترداد. تكاليف الشحن الإضافية غير قابلة للاسترداد بمجرد شحن الطرد. أنت مسؤول عن دفع هذه الرسوم، ولا يمكننا إعفاؤها أو استردادها، حتى إذا تم إرجاع الطلب إلينا.بمجرد استلامنا وتأكيد العنصر المرتجع، سنرسل لك بريدًا إلكترونيًا لإعلامك بأننا قد تلقينا العنصر المرتجع. سنخطرك أيضًا بموافقة أو رفض طلب الاسترداد الخاص بك.إذا كانت لديك أي مشاكل تتعلق بعملية الاسترداد، يرجى الاتصال بنا. service@roymall.com أو Whatsapp: +447549870296
    Description:
    - This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration

    The default boot into single-point measurement interface.

    Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.



    Startup and shutdown:
    Hold down the CTRL key off press the power switch button.

    The boot state, long press (2S above) the switch button, after the release, the instrument will shut down

    The boot state, long press (2S above) the switch button, after the release, the instrument will shut down



    Recommend the use:
    1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.

    2, try to use good quality RF cable and connectors.

    3, calibrated cable marked to the next may not need to calibrate and direct use.

    4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.

    5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.

    6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis



    Specification:
    working currency: 140MHz~2700MHz

    stepped frequency: 1kHz

    Display: 2.4inch TFT

    resolution: 320*240(QVGA)

    battery: 2000mAH(7.4Wh)

    power consumption: <1.5W

    charge current: 400mA

    charge port: USB

    Auto power off can be set 5-60minutes



    Measured parameters:
    resistence reactance standing wave s11

    resolution ratio: 4 number

    frequency accuracy: about 5ppm

    Connector: SMA-K

    Measurement range:
    impedance: 0.1~1000

    standing wave: 1.000~65

    s11(dB): 0dB~-60dB

    Working temperature: 0~40 degree



    Package included:
    1 x Original N1201SA Antenna Analyzer Meter

    1 x English User Manual

    Reviews(16)
    4.90
    • marcar
      5.0
      Interesting device for RF experimentation and antenna matchin measurement. It cames calibrated, althogh it provides instructions to calibrate it yourself (ou will need special terminal caps for this). Seems to work fine after some basic testing. Instructions manual is quite complete and illustrated.
    • BG151551132
      5.0
      Ok.
    See All Reviews
    Description
    Description:
    - This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration

    The default boot into single-point measurement interface.

    Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.



    Startup and shutdown:
    Hold down the CTRL key off press the power switch button.

    The boot state, long press (2S above) the switch button, after the release, the instrument will shut down

    The boot state, long press (2S above) the switch button, after the release, the instrument will shut down



    Recommend the use:
    1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.

    2, try to use good quality RF cable and connectors.

    3, calibrated cable marked to the next may not need to calibrate and direct use.

    4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.

    5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.

    6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis



    Specification:
    working currency: 140MHz~2700MHz

    stepped frequency: 1kHz

    Display: 2.4inch TFT

    resolution: 320*240(QVGA)

    battery: 2000mAH(7.4Wh)

    power consumption: <1.5W

    charge current: 400mA

    charge port: USB

    Auto power off can be set 5-60minutes



    Measured parameters:
    resistence reactance standing wave s11

    resolution ratio: 4 number

    frequency accuracy: about 5ppm

    Connector: SMA-K

    Measurement range:
    impedance: 0.1~1000

    standing wave: 1.000~65

    s11(dB): 0dB~-60dB

    Working temperature: 0~40 degree



    Package included:
    1 x Original N1201SA Antenna Analyzer Meter

    1 x English User Manual

    You also Interesting

    احصل على آخر أخبار العلامة التجارية وخصم 15% على طلبك الأول.

    QQ好友QQ空间新浪微博微信朋友圈百度贴吧复制链接
    取消