Back

NX3 3D Flight Controller Gyroscope Balance For Fixed-wing Aircraft RC Airplane

NX3 3D Flight Controller Gyroscope Balance For Fixed-wing Aircraft RC Airplane

Roymall C.o.

$13.00 /$24.39

4.41617

Shipping to: United States

Express: 7-12 business days

Standard: 15-25 business days

location

ወደ ዘንቢል ጨምር አሁን ይግዙ

$19.99 /$24.39

Coupon Code

Direct purchase from the factory

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

Credit or Debit Card

ደህንነቱ የተጠበቀ ክፍያ

ነፃ ስጦታ

ከማንኛውም ግዢ ጋር ነፃ ስጦታ

የመላኪያ ፖሊሲ

ከ$9.9 በላይ ትዕዛዞች ላይ ነፃ መደበኛ መላኪያ

የመመለሻ ፖሊሲ

የተመለሱ እቃዎች ከሸቀጦቹ የመጡበት ቀን ጀምሮ በ40 ቀናት ውስጥ ይቀበላሉ። ልዩ የተዘጋጁ እቃዎች መመለስ ወይም መለወጥ አይቻልም። በኤሌክትሮኒክ ስጦታ ካርድ የተገዙ እቃዎች መለወጥ ብቻ ይቻላል; መመለስ አይቻልም።

ነፃ ስጦታ

እንኳን ወደ Roymall በደህና መጡ፣ ለከፍተኛ ደረጃ የስጦታ መደብር ስጦታዎች የሚገዙበት ሙያዊ ድረ-ገፃችን። ድጋፍዎን ከፍ ብለን እናደርገዋለን እናም በእያንዳንዱ ግዢዎ ላይ ተጨማሪ ደስታ በማክበር አመስጋኝነታችንን ለመግለጽ እንፈልጋለን። ከእኛ ጋር በሚገዙበት ጊዜ፣ የሕይወት ደረጃዎን የሚያሻሽሉ ከፍተኛ ጥራት ያላቸውን ምርቶች ብቻ ሳይሆን እያንዳንዱን ትዕዛዝ የሚያገኙበትን ልዩ ነፃ ስጦታም ያገኛሉ። ስብስባችንን ለመጎብኘት እና ፍጹም ስጦታዎችዎን ለማግኘት ዝግጁ ነዎት? የከፍተኛ ደረጃ የስጦታ መደብር እቃዎችን ይምረጡ፣ ትዕዛዝዎን ያቅርቡ እና ከግዢዎ ጋር የሚመጣውን የነፃ ስጦታዎ ደስታ ይጠብቁ።

የመላኪያ ፖሊሲ

ትዕዛዞችዎን ከተቀበልን በኋላ እቃዎችን ወደእርስዎ ለማድረስ እና በሰላም እንዲደርሱ እንሰራለን። የመላኪያ ዝርዝሮች በማረጋገጫ ኢሜልዎ ውስጥ ይሰጣሉ።በአብዛኛዎቹ ሁኔታዎች፣ ትዕዛዞች በ2 ቀናት ውስጥ ይቀርባሉ።በልዩ ሁኔታዎች፣ እንደሚከተለው ይዘገያል፡ ትዕዛዝን ቅዳሜ፣ እሑድ ወይም በዓላት ላይ ሲያቀርቡ፣ ለ2 ቀናት ይዘገያል..በአብዛኛው፣ ያለ የበረራ መዘግየት ወይም ሌሎች የአካባቢ ሁኔታዎች ተጽዕኖ ሳይኖርበት 5-7 የስራ ቀናት (ሰኞ እስከ ዓርብ) ይፈልጋል..የመላኪያ አገልግሎታችን በዓለም ዙሪያ ስለሆነ፣ የመላኪያ ጊዜዎች በአካባቢዎ ላይ የተመሰረቱ ስለሆኑ በርቀት ያሉ አካባቢዎች ወይም ሀገሮች ውስጥ ከሆኑ ጥቂት ጊዜ ይፈልጋል እና በትዕግስት ይጠብቁ።

1. መመለሻ እና መለዋወጫ ፖሊሲ

እቃዎችን ከ roymall.com ብቻ እንቀበላለን። ከአካባቢያችን አከፋፋዮች ወይም ሌሎች ነጋዴዎች ከገዙ፣ ከእኛ ጎን መመለስ አይችሉም። የመጨረሻ ሽያጭ ዕቃዎች ወይም ነፃ ስጦታዎች ለመመለስ አይቀበሉም። ለመመለስ ብቁ ለመሆን፣ ዕቃዎ ያልተጠቀሙበት እና እንደተቀበሉት በተመሳሳይ ሁኔታ ውስጥ መሆን አለበት። እንዲሁም በዋናው ማሸጊያ ውስጥ መሆን አለበት።ከእኛ የመመለሻ መመሪያዎችን ከተቀበሉ በኋላ፣ የተመለሱ ዕቃዎችዎን ያሸጉ እና ጥቅልዎን በአካባቢያችሁ ፖስታ ቤት ወይም ሌላ ኩሪየር ላይ ያስቀምጡ።
የተመለሰውን ወይም የተለወጠውን ዕቃ በ3-5 የስራ ቀናት ውስጥ ከተቀበልን በኋላ እንሰራለን። መመለሻው በራስ-ሰር ወደ ዋናው የክፍያ ዘዴዎ ይመለሳል።ምርቱ ልዩ ከተሰራ፣ ልዩ መጠን፣ ልዩ ቀለም ወይም ልዩ ህትመት ጨምሮ፣ �ንዳንድ መመለስ ወይም መለወጥ አይችልም።ተጨማሪ እርዳታ ከፈለጉ፣ እባክዎን ያግኙን። service@roymall.com ወይም Whatsapp: +447549870296

2.የመመለሻ ፖሊሲ

የተመለሰውን ጥቅል ከተቀበልን እና ከተፈተነ በኋላ ሙሉ መመለሻ ወይም 100% የማከማቻ ክሬዲት ያገኛሉ። መመለሻው በራስ-ሰር ወደ ዋናው የክፍያ ዘዴዎ ይመለሳል። እባክዎን ያስታውሱ የመላኪያ ወጪዎች እና ማንኛውም ታክስ ወይም ክፍያዎች መመለስ አይቻልም። ተጨማሪ የመላኪያ ወጪዎች ጥቅሉ ከተላከ በኋላ መመለስ አይቻልም። እነዚህን ክፍያዎች ለመክፈል እርስዎ ተጠያቂ ነዎት እና ትዕዛዙ ወደእኛ ከተመለሰም ሊሰረዙ ወይም መመለስ አይችሉም።ከተመለሰው ዕቃ ከተቀበልን እና ከተረጋገጠ በኋላ፣ የተመለሰውን ዕቃ እንደተቀበልን ለማሳወቅ ኢሜይል እንልካለን። እንዲሁም የመመለሻዎ መፈቀድ ወይም ማያያዣ ስለሆነ እናሳውቅዎታለን።በመመለሻ ሂደቱ ላይ ችግር ካጋጠመዎት፣ እባክዎን ያግኙን። service@roymall.com ወይም Whatsapp: +447549870296

Videos for similar product

Loading product videos...

❮

❯

Products related to this item

Loading related products...

❮

❯

NX3 PRO flight controller, Click Here

Description:Voltage Range: 5-6V DC.Dimensions: 40mm x 25mm.
Weight: 6.5g.

Feature:

1.Four Model Types supported: single aileron, dual ailerons , flapperons, for delta and vtail.
2.Three Flight Modes supported:a. Rate Mode ,Rate Mode for offset correction.b. Hold Mode ,HOLD mode for attitude holdc. Gyro Off Mode,transsmiter control the plane directly.3.Two kinds of Gain Control Method supported:Master Gain from the radio, Independent Axis Gain from the Variable resistor on the Controller board.4.Using superior algorithm, Bring a more comfortable and more sensitive sense of control .

VERY IMPORTANT :

The Controller has to re-learn center position after installation,or replacing a new radio system, or making a trimming(or Sub-Trim)change within the transmitter, otherwise the servos may move to one side automatically when switching to hold mode.To do this,just quickly flip the flight mode switch twice between rate mode and hold mode within 1 second!

Status LED Description:

LED OFF: NX3 in Gyro Off Mode.LED ON: NX3 in Rate Mode.LED flash: NX3 in Hold Mode.

WARNING :PLEASE READ THE FOLLOWING STEPS VERY CAREFULLY BEFORE YOU START TO INSTALL A NEW PLANE!

Step 1:Mounting

The board need to be firmly mounted near the center of the gravity of the plane by using the double-tape provide.Please make sure the longer side of the board is along with the heading direction.After mounting ,please check again if the board is attached firmly in the plane.
Step 2:Model Type SelectionThe DIP switches set the WING mode,Please match the type of your aircraft with Normal Airplane(single aileorn),Normal Airplane(dual aileron for flapperon), for Delta-wing (Flywing-wing)and V-tail according the pictures 1 to 4. if you change any DIP switch settings, power cycle the device to enable the new setting to take effect.Step 3:WiringPlease connect the control board and the radio receiver using wires provide according the pictures 1 to 4.Pay attention to the color of wires to avoid anti-plug.Step 4:Switch and Master Gain Channel ConfigureAssign a 3-pos switch to the channel which connected the pinsinchsIN-4inchs(AUX-IN) for switching the flight mode in flight.When use a 2-pos swtich,you can only switch between Rate Mode and Hold Mode,So you can not switch to Gyro Off Mode.It will be set to Rate Mode by default if switch channel is not connected to the board. If your transsmiter has Travl Adjust Function(End Point Adjust Function),you can change the switch channel's End Point to change Master Gain.

Reviews(1495)

4.90

BG135747313

5.0

So so happy.🥰..first I was worried coz I want to fit in my almost 20 year old Corsair but amazingly I don’t have to do nothing just plugged and it perfectly working how I want.. feeling great coz after 20 year my Corsair gonna touch the sky.. thanks 🙏🏼 to banggood.. love this sit..gonna be life time customer...
haroonshaikh5

5.0

Very Responsive ! easy to setup ! Great product.
Used in F3A RC plane purchase also by banggood.
The flight perfomance of the model aircraft is superb. It did not require any trims on the first flight either.

See All Reviews

Questions & Answers(56)

Q: do i need a elavon mix in my radio or will this stabilizer do the mixing for me?

9 answers

Q: is this only for fixed wing plane or can it be used with a plane that has elevator on the tail.

8 answers

Description

Step 5:Gyro direction and Gyro Gain configureBefor flight, you have to verfy that the gyro compensation direction is OK, otherwise, it could lead to losing control or even crash during the flight!the VR gain POTs on the NX3 control the correction gain and direction for each of the pitch (ELE), roll (AIL) and yaw (RUD) axis.5 o"clock = max gain in one direction12 o"clock = zero gain7 o"clock = max gain in opposite direction
To perform the examination,power on the board,pick the plane up and check it by following the six steps below:
Step 6: re-learn center positionQuickly flip the flight mode switch twice between rate mode and hold mode within 1 second!Thanks for using NX3 Flight Controller. if u have any questions, plz feel free to contact clarencetuan.mat@gmail.com